A photo report that disassembled the iPhone 5 just released was released

Sales of the latest iPhone series "iPhone 5" started today. In Apple retail stores such as Japan, the United States, the United Kingdom, France etc., a line of people asking for an iPhone was made,IFixitI decompose the iPhone 5 I got as soon as possible.

IPhone 5 Teardown - iFixit
http://www.ifixit.com/Teardown/iPhone-5-Teardown/10525


IPhone 5 used for disassemblyMacfixit AustraliaIt seems to have provided it.


Start disassembling without hesitation. As a major change in appearance, the bottom 30 pin Dock connector disappeared and it became an 8 pin connector. Since the screw is the same special pentagonal screw as the iPhone 4 / 4S, remove it with the corresponding driver.


And remove Retina display with sucker. It was said that this glass surface was easier than ever before.



The display and the main body are connected by a connector, and the connector is fastened with a normal plus screw, so use a screwdriver to remove it.


This completes separation between the display and the main unit. Proceed to removing the fine parts.


First off from the battery. Since the connector part is covered with the cover fastened with three screws, first remove the cover ......


Lift and take out.


This is the battery of the iPhone 5, the capacity is 1434 mAh, 3.8 V. IPhone 4S 's was 1432 mAh, 3.7 V, so it has changed subtly.


Subsequently, we started removing the antenna and the camera


Remove the screws fixed to the body frame ......


Remove unit at a stretch.


Parts of the camera part will also come off separately.


This is a series of main unit. Gyro sensor and Wi-Fi module are mounted on the left side (the lower side of the main unit) for power supply, from the center to the right.


Before you turn it ... ...


Finally reach the heart of the iPhone 5, A6 processor.