Anker Eufy's robot vacuum cleaner 'Eufy Clean X9 Pro' photo review that wipes the mop by 'pushing'

Anker's smart home brand `` Eufy '' has released the `` Eufy Clean X9 Pro '', a robot vacuum cleaner equipped with a pressurized rotating mop. I got this robot vacuum cleaner that pushes the mop against the floor and cleans it strongly, so I checked the appearance first.

Eufy Clean X9 Pro with Auto-Clean Station | Push-to-wipe robot vacuums.

This is the package of 'Eufy Clean X9 Pro'.

The contents are the Eufy Clean X9 Pro main unit, automatic cleaning station, power cord, replacement filter, and instruction manual.

The size of Eufy Clean X9 Pro is about 35.3 cm x about 32.7 cm x about 11.4 cm and weighs about 4.6 kg.

From the left, Eufy Clean X9 Pro, size 35.3 cm × 9.2 cm × 35.3 cm ' Rumba 980 ', 34 cm × 34 cm × 9.5 cm ' SwitchBot S1 ', 36.2 cm × 36.2 cm × 10.4 cm ' DEEBOT X1 TURBO ' side by side Comparing the shapes, you can see that the Eufy Clean X9 Pro is closer to an oval than a perfect circle.

Looking from the side like this. A laser sensor protrudes from the top of the head.

Drawing a line highlights the thickness of the Eufy Clean X9 Pro. When replacing existing products, it is also necessary to check whether the height of the robot vacuum cleaner can pass under the furniture.

Looking at the Eufy Clean X9 Pro from the top, it looks like this. There are 3 buttons at the bottom.

There is a dent on the button side that serves as a starting point for removing the cover.

open.

By removing the cover, you can pull out the dust box.

This is the dust box.

The back side is a filter.

Press 'PRESS' on the side to throw away the accumulated garbage.

It pops open.

The filter can be removed by applying force from the position of the arrow.

removed filter.

It is exactly the same type as the attached replacement filter. This filter is washable.

The Eufy Clean X9 Pro sensors are clustered on the front.

There are two charging terminals on the back.

The back side looks like this.

In the direction of the front, there is one small wheel, a side brush that collects dust, and a rotating brush.

Tires are made of rubber. If you apply force from above, it will sink.

There are two mops for wiping with water at the bottom.

It is attached with Velcro and can be removed and washed.

The size of the automatic washing station is about 42.2 cm x about 41.6 cm x about 44.3 cm and weighs about 7.2 kg.

The back looks like this. The one on the top is the handle, and the one on the side is the power terminal.

The power cable is a 3P type.

Open the lid on the top to access the dirty water tank and clean water tank.

Gray is a 3.6L capacity sewage tank, and light blue is a 4.1L capacity clean water tank.

Both tanks have a lever labeled 'PULL' that can be pulled up to remove the cover.

It looks like this when the cover is removed.

The purified water tank has a water supply port, so you can immediately supply water without removing the cover by removing the water supply port cap. The cap is not tied with a string, so be careful not to lose it.

That's it for the exterior shots. In the next article, I will show you how to actually use it in detail.

'Eufy Clean X9 Pro' can be purchased from