Sony's 4K resolution / 27-inch gaming monitor 'INZONE M9' with a maximum refresh rate of 144 Hz has appeared, and the appearance looks like this
From the gaming device brand “
INZONE M9 | Gaming Gear INZONE | Sony
https://www.sony.jp/inzone/products/INZONE_M9/
INZONE M9 case
When you open the box, you can see the contents such as the setup guide and the INZONE M9 body covered with styrofoam.
The contents are the foot part of the monitor stand, the arm part and the screw, the AC adapter and the power cable, the instruction manual, the warranty card, the INZONE sticker, etc.
Stack the legs of the monitor stand on the arm.
Fix the legs with the two screws provided.
The monitor stand looks something like this, it is a tripod type that supports at three points. However, the legs are not movable.
The size of the AC adapter is about 16.7 cm wide x about 8.2 cm deep x about 3.1 cm thick. The rated output is 19.5V x 8.21A, approximately 160.1W. The power consumption (standard value) of INZONE M9 is nominally 139W.
The actual weight of the adapter was 644 g. The length of the cable on the adapter side is about 140cm.
And the length of the power cable connecting from the AC adapter to the outlet side is about 45 cm. The total length of the AC adapter and power cable is about 2 meters. The length of the power cable is quite short, so depending on the position of the outlet, the point is where to place the slightly larger AC adapter.
The rating of the power cord is 2.5A/250V, and the terminal is glasses type. In some cases, it may be possible to change to a longer power cable with the same standard.
The INZONE M9 body looks like this. In addition to the dedicated monitor stand on the back, a 100 mm x 100 mm VESA mount can be attached.
Before attaching the monitor stand, check the port on the bottom of the back. From the left, 1 3.5mm audio output, 3 USB Type-A (Downstream) capable of 5V 0.9A output, 1 USB Type-B (Upstream), USB Type-C (
The monitor stand can be fixed just by inserting it.
A view of the INZONE M9 with the monitor stand attached from the front. The screen size is 27 inches, and the panel type is IPS liquid crystal and non-glare. The weight is about 6.8 kg including the monitor stand.
The back looks like this.
There was a ventilation hole in the upper part of the back.
In addition, the menu button and power button are arranged on the lower left side facing the back.
INZONE M9 has a tilt function, and you can change the tilt from 0 degrees to 20 degrees. However, the swivel function that shakes the head left and right and the pivot function that rotates the monitor screen vertically and horizontally are not installed.
The height adjustment width of the monitor is 70mm. The left below is where the monitor is raised to the top, and the right is where the monitor is lowered to the bottom. The height is adjusted by sliding it on the slanted monitor stand, so the monitor moves slightly back and forth when the height is adjusted.
INZONE M9 is handled by Amazon.co.jp and can be purchased for 154,000 yen including tax.
Amazon | Sony Gaming Monitor INZONE M9 SDM-U27M90: 4K 27 inches / Wide color gamut and high contrast / Refresh rate 144Hz / Response speed 1ms / VRR compatible / Direct type LED / IPS liquid crystal / VESA compatible / Perfect for PlayStation5 Normal | Sony ( SONY) | Display mail order
Related Posts:
