Honda's small and lightweight generator 'EU26iJ' engine start review that is super easy to use
Honda released the EU26iJ generator on March 17, 2022, which combines a high output of 2.6kVA with a lightweight, compact body that is easy to carry. To start a generator, you need to operate multiple switches and dials, but the EU26iJ can be started in two easy steps. I had the opportunity to try out the EU26iJ, which has the great advantages of being small, lightweight, and easy to start, so I first took a closer look at its appearance and how to start it.
Honda | Launches EU26iJ, a handheld generator equipped with a newly developed engine
·table of contents
◆1: EU26iJ appearance check
◆2: Preparations for using EU26iJ for the first time
◆3: Checking the startup procedure for the EU26iJ
◆1: EU26iJ appearance check
The EU26iJ was delivered in a large cardboard box.
Inside the cardboard box was the EU26iJ, wrapped in a plastic bag.
The EU26iJ control panel looks like this. The red switch is the engine switch, and next to it are the frequency change switch and the eco throttle switch. There is one 26A and two 15A outlets.
The exhaust vent is mounted on the opposite side of the control panel.
The starting grip is mounted on the left side of the control panel. The slit on the left side is the cooling air intake.
The opposite side only has a cooling air intake and no switches or other components.
There is a sturdy grip on the top, and the fuel filler is located near the control panel.
There is a cover on the top that can be removed without the use of tools, allowing you to maintain the spark plugs simply by opening the cover.
There are four large rubber feet on the bottom.
In addition, a grip is installed on the bottom ...
It can be carried by one person like this. It weighs 26.5kg without fuel or oil, so it seems like it could be carried for several dozen meters without any problems.
◆2: Preparations for using EU26iJ for the first time
When starting the EU26iJ for the first time, you need to fill it with oil and fuel (gasoline). First, use a Phillips head screwdriver to remove the cover on the side where the starting grip is mounted in order to fill the oil.
Below is the state with the cover removed. The part surrounded by a red frame is the oil filler port.
Remove the fuel cap...
I filled the engine with oil. This time, I used '
Next, fill up the gasoline. The gasoline filler cap has a fastener to prevent it from falling off.
While visually checking the remaining amount of gasoline, I filled up the tank with gasoline from a portable gasoline can.
When filled to the brim with oil and gasoline, it weighed 30.05kg, which means it can be carried by one person several dozen meters.
After filling up with oil and gasoline, before starting the engine, change the frequency switch to match the equipment you will be connecting and the region you will be using. This time, I switched it to 60Hz because I will be using it in western Japan.
◆3: Checking the startup procedure of the EU26iJ
Starting the EU26iJ takes just two steps. First, turn the engine switch to the 'run' position.
After that, just pull the starter grip to start the engine. Pull the starter grip gently, stop when it becomes heavy, and then pull it hard again to start the engine smoothly.
In the movie below, you can see how the EU26iJ actually works.
Once the engine is running, you can use it by simply connecting the appliances you want to power. In the photo below, a tabletop induction cooker and an electric kettle are connected.
It was also able to operate precision machinery such as PCs,
When I actually tried starting the EU26iJ, I was able to start it with just two actions: 'Twist the engine switch' and 'Pull the starter grip.' With a typical generator, you need to twist the fuel cock and operate the engine switch multiple times, but with the EU26iJ, anyone can start it easily.
Continued
The EU26iJ supports remote control and checking of operation status using the smartphone app ' Honda My Generator '. Please see the following link for an article summarizing the procedure for using Honda My Generator and the volume of the operation noise of the EU26iJ.
I tried connecting the 'Honda My Generator' app, which allows remote control of generators and checking their operating status, to Honda's small and lightweight generator 'EU26iJ' - GIGAZINE
Related Posts:
