Review of the portable power supply 'DJI Power 1000' that can quickly charge drones with a maximum output of 2000W and a battery capacity of 1024Wh
The portable power source ' DJI Power 1000 ', which DJI released in Japan on Thursday, April 18, 2024, is equipped with a large-capacity 1024Wh battery and can output up to 2000W continuously. In addition, by using optional expansion accessories, it is possible to charge from a solar panel or in-car power source, or quickly charge a drone. I was able to borrow such a DJI Power 1000, so I tested its performance.
DJI Power 1000 - 1024Wh Portable Power Supply - DJI
·table of contents
◆1: Check out the appearance and ports of the DJI Power 1000
◆2: Check AC input performance
◆3: Check AC output performance
◆4: Check the fast charging standard of the USB-C port
◆5: I put the DJI Power 1000 in its special storage case
◆6: Can also be charged from the car's power source or solar panel
◆7: It can also quickly charge DJI drones
◆1: Check out the appearance and ports of the DJI Power 1000
In addition to the DJI Power 1000 itself, the DJI Power 1000 comes with a power cord, a quick start guide, safety instructions, and a warranty card.
This is what the DJI Power 1000 looks like.
On the left side are two AC output ports, with a combined maximum continuous output of 2000W.
The center has two USB-A and two USB-C ports. The USB-A port has a maximum output of 24W, and the USB-C port has a maximum output of 140W.
There is an LCD panel on top of the USB port, which allows you to check the remaining battery level, input power, output power, etc.
On the right side are the AC input port, the SDC input/output port, and the SDC Lite input/output port. The maximum input power of the AC input port is 1200W, while the maximum output of the SDC input/output port and the SDC Lite input/output port is 240W and the maximum input is 400W.
There are no ports on the back.
There is a large exhaust hole on the left side.
There is also an exhaust hole on the right side. In addition, there is a screw hole at the bottom of the exhaust hole for attaching accessories.
There are two grips on the top surface.
There are two large anti-slip pads on the bottom.
The included power cable is earthed.
The dimensions of the DJI Power 1000 are 448mm long x 225mm wide x 230mm high, and it weighs 13.25kg.
Although it weighs over 13kg, it has two large grips so you can hold it steadily with both hands.
◆2: Check AC input performance
The DJI Power 1000 can be charged at up to 1200W via an AC input port.
At the bottom of the AC input port is a switch that allows you to change the input power to 1200W or 600W.
In 600W input mode, the LCD panel displayed a value of around 580W.
At 1200W, the input display on the LCD panel was around 950W.
◆3: Check AC output performance
The maximum continuous output of the DJI Power 1000 is 1200 W. When I actually connected
However, when I powered the electric kettle while charging the DJI Power 1000, the output power dropped to around 1074W.
The DJI Power 1000 has an automatic power frequency detection function. Since I used it in the Kansai region this time, the output frequency was automatically set to 60Hz.
You can also manually switch the output frequency by unplugging the DJI Power 1000 from the power source and pressing and holding the AC button for 10 seconds.
Now it has switched to 50Hz.
DJI Power 1000 can also be used as an uninterruptible power supply (UPS). For example, if you connect the AC input port of the DJI Power 1000 to a household power source and connect the AC output port of the DJI Power 1000 to a PC as shown below, you can supply power to both the DJI Power 1000 and the PC from the household power source. In this state, if the power supply from the household power source is cut off due to a power outage, the output will be switched to the output from the DJI Power 1000 within 20 milliseconds, allowing the PC to continue operating.
In the movie below, you can see how the PC continues to run even if the power cable is unplugged from the AC input port.
◆4: Check the fast charging standard of the USB-C port
I checked the charging standards supported by the DJI Power 1000's USB port using the USB tester ' Power-Z KM003C '. The USB-A port supports the following standards. It supports Quick Charge 3.0 and other standards.
The USB-C port supports the following standards: In addition to Quick Charge 3.0, it also supports USB PD 3.1.
The fixed version of USB PD 3.1 is as follows. It is characterized by its rare output of 5V and 5A.
The 5V/5A output is examined in detail in the following article.
◆5: I put the DJI Power 1000 in its special storage case
In addition to the DJI Power 1000 itself, I was also able to borrow a DJI Power 1000 Protective Storage Case, a DJI Power Car Power Socket - SDC Power Cable, a DJI Power Solar Panel Adapter Module, and a DJI Power SDC - DJI Air 3 Fast Charging Cable, so I'll take a closer look at each of them.
This is what the DJI Power 1000 protective storage case looks like.
The DJI Power 1000 protective storage case fits perfectly inside.
By opening the zipper on the side, you can access the various ports of the DJI Power 1000 while it is stored.
The exhaust hole can also be opened and closed.
There is space on the back for small items.
The accessory compartment is large enough to hold thin items such as smartphones and tablets.
◆6: Can also be charged from the car's power source or solar panel
The DJI Power Car Power Socket to SDC Power Cable allows you to charge your DJI Power 1000 from your car's cigarette lighter socket.
This is what the DJI Power car power socket - SDC power cable looks like.
Maximum output is 100W.
When I connected it to the cigarette lighter socket in my car, it charged successfully.
The input power on the LCD panel was exactly 100W.
The DJI Power Solar Panel Adapter Module allows you to charge the DJI Power 1000 from a solar panel. In addition to genuine DJI solar panels, solar panels from other manufacturers that have an XT60 connector can also be connected.
In addition to the DJI Power solar panel adapter module itself, the package contained mounting hardware, tools, screws, and instructions.
The DJI Power Solar Panel Adapter Module can connect up to three solar panels.
The maximum output power per port is 200W, with a total maximum output power of 400W for all three ports.
Easy to install in minutes using the included tools.
The DJI Power Solar Panel Adapter Module can be used without being attached to the DJI Power 1000 main unit, but attaching it to the main unit makes it easier to handle the cables.
When connected to a solar panel it looks like this.
◆7: It can also quickly charge DJI drones.
The DJI Power 1000 is equipped with a fast charging function for DJI drones, and you can fast charge them by using a cable that is compatible with each drone. For example, the DJI Power SDC - DJI Air 3 fast charging cable that is compatible with
The charging times for various drones are as follows:
DJI Power 1000 is sold at official online shops , etc. At the time of writing, it is available at Amazon.co.jp for 114,400 yen including tax.
Amazon.co.jp: DJI Power 1000 Portable Power Supply, 1024Wh LFP Battery, 70 Minutes Quick Charging, Home Generator, Maximum Output Power 2000W, Solar Generator, Portable Power Supply for Camping & RVs, Energy Saving, Power Outage Prevention, Disaster Prevention Supplies, Emergency Power Supply, Disaster Prevention Safety Association Recommended, Maximum 5 Year Warranty: Electronics & Cameras
Related Posts:
