A photo review of the 10-inch model of the official Raspberry Pi touch panel, 'Raspberry Pi Touch Display 2,' highlighting its significantly increased size and improved resolution.
The '
A new 10' Raspberry Pi Touch Display 2, available now at $80 - Raspberry Pi
https://www.raspberrypi.com/news/a-new-10-raspberry-pi-touch-display-2-available-now-at-80/
The packaging for the Raspberry Pi Touch Display 2.
The box contains the Raspberry Pi Touch Display 2 unit, screws, a data cable, and a power cable.
The 10-inch Raspberry Pi Touch Display 2 has an active display area of 135.36mm x 216.576mm, or 10.1 inches. In addition, it features a high resolution of 1200 x 1920 pixels, a wide 85-degree viewing angle, and a touchscreen controller that supports 10-finger touch, compared to the 5-inch and 7-inch models.
Here's a comparison with the iPhone 16, which measures 147.6mm in height and 71.6mm in width.
The bezel width was approximately 16mm, which is about the same as the 7-inch model.
The actual weight is 480g.
The back features connectors and screw holes for connecting to the Raspberry Pi series.
When viewed from the side, you can see that the display portion is extremely thin, while the back portion is raised.
When held in the hand, it feels like this: the Raspberry Pi Touch Display 2 alone, before attaching the Raspberry Pi, weighs about 480g, which is a fair amount of weight. However, both the size and weight are not so heavy that it can't be held and operated with one hand, making it suitable for both handheld tablet and stationary display use.
The Raspberry Pi Touch Display 2 is compatible with all Raspberry Pi models from the 1B+ onwards, excluding the Raspberry Pi Zero series. By attaching a Raspberry Pi to it, you can use it as a touch-enabled tablet-like device. For more information on how to assemble and use a tablet-like device with the Raspberry Pi Touch Display 2, please refer to the following article.
I tried making a tablet-like device by attaching a Raspberry Pi 5 to the official touch panel 'Raspberry Pi Touch Display 2' - GIGAZINE
This table summarizes the features of each size of the Raspberry Pi Touch Display 2.
| 5 inches | 7 inches | 10 inches | |
|---|---|---|---|
| resolution | 24-bit RGB | 24-bit RGB 720 x 1280 pixels | 24-bit RGB 1200 x 1920 pixels |
| Active area | 62.1mm x 110.4mm | 86.94mm x 154.56mm | 135.4mm x 216.6mm |
| Display type | True multi-touch capacitive touch panel liquid crystal display with 5-finger touch support and thin-film transistor (LCD TFT) technology. Usually black, transmissive, anti-reflective surface | True multi-touch capacitive touch panel liquid crystal display with 5-finger touch support and thin-film transistor (LCD TFT) technology. | A true multi-touch capacitive touch panel that supports 10-finger touch. |
| price | $40 (approximately 6300 yen) | $60 (approximately 9500 yen) | $80 (approximately 12,700 yen) |
The 10-inch model of the 'Raspberry Pi Touch Display 2' is priced at $80 (approximately 12,700 yen) including tax. It can be purchased from the official Raspberry Pi store.
Buy a Raspberry Pi Touch Display 2 – Raspberry Pi
https://www.raspberrypi.com/products/touch-display-2/
Related Posts:
