A wonderfully designed wristwatch "HYT H 3" which informs the time of the glass tube liquid

Clock maker 's characteristic watch with a complex design using liquid "HYT"Is the latest work"HYT H3"Has been announced. Using titanium and platinum as the material, a large number of gears enter the square dial, a watch with a novel design that the yellow liquid that entered the glass tube notifies the time will appear.

H3 Titanium and platinum | HYT
http://www.hytwatches.com/Collection/Watch/Item/h3_titanium_and_platinum-25.sls

You can see in detail how the awesome design of "H3" is unified in the following movie.

HYT H3: The linear fluid revolution - The Movie! - YouTube


Something floats in the center of the space room.


What was sandwiched between the robot arms was "HKT selling"H1"Or"H2Round design like a wrist watch.


The wristwatch falls apart by mysterious magnetic force.


It was what was newly designed with the liquid of the glass tube that was in it ......


It is "H3" which becomes HKT latest work. I can not find anything that should be in the wristwatch, such as the second hand and the long hand, anywhere on the board.


Titanium which is PVD coated with charcoal gray and platinum of satin finish finished with micro blasting are used for the material of the case.


A number of cool gears with warbone that can be seen everywhere.


Pull the side crown ......


Memory in the dial moves casually.


Below the glass tube there is a number board showing "time" from 0 to 24, and a mechanism that lets you know the current time by increasing or decreasing the yellowish green liquid inside. For example, in the image below it means that it is before 5 AM.


The red bar that moves with Kashakasha is, so to speak, a long hand and marks "minutes" from 0 to 60.


An indicator that indicates the remaining power of the power reserve is also attached to the back side. It is possible to operate for about one week (170 hours) and it will not stop the clock immediately, without having to rewind the screw every day.


It is a design like steam punk and latest technology merged, it might be a dying wristwatch for mecha love.


H3 is a hand-wound wristwatch with dimensions of 48.8 mm in diameter, 62 mm in length, 41 mm in width and 16 mm in height. Sapphire crystal with antireflective coating is used on the board surface, worry about getting scratched is less, it is 30 M (3 atm) waterproof design. Previous model's "H2 Titanium Platinum SQ"Is sold for 32.4 million yen.


According to Monochrome Watches, "HYT H3" is planned to manufacture only 25 pieces, and the price will be 280 thousand francs (about 36.5 million yen).

Pre-Baselworld 2015 - HYT H3 - specs & price - Monochrome - Watches
http://monochrome-watches.com/hyt-h3-baselworld-2015-specs-price/