I tried using the world's first gaming mouse with a cooling fan "MO-BLE001DTF"



In addition to the Omron's switch with resolution of 6500 dpi, maximum of 45 macro setting functions, stroke of over 5 million times, the world's first gaming mouse equipped with a cooling fan "Tt eSPORTS Black Element Cyclone Edition MO-BLE 001 DTF". Because it is a unique model equipped with the function "cool the fingertip" which was not likely, I actually decided to purchase it and check every corner.

◆ Photo review

The package looks something like this.


As you open the lid you can see the contents.


Besides the mouse body, the contents include cooling fans, soft cases, instruction manuals.


The pack containing the instructions comes with an extra seal and a special control software installation disk etc.


When you mouse over the case, it looks like this.


The mouse body is like this.


Cable is a cotton and the measured length is about 180 cm.


Body size is 123.8 × 66.7 × 41.6 mm (excluding fans).


Total number of buttons is 9, breakdown is right side × 1, left side × 3, top side × 5 (left click, including scroll wheel).


There is a click feeling when it is slightly frosted on the wheel, you can stop scrolling and scrolling at the targeted place.


When I grasp it with the hand of an adult male, it is like this. The surface is coated with rubber coating for nonslip so that stable hold is possible.


With the logo which imaged the dragon behind.



The side is like this.



It looks like this from the front.


Since the parts with Teflon processing are attached to the contact surface with the mouse pad on the bottom, it is possible to move the mouse smoothly.


There are five removable weights of 4.5 grams built into the bottom of the mouse, so you can adjust the weight to your liking.


Fan size is 30 × 30 × 10 mm.


Plug in the mini USB port on the front of the mouse and use it.


Looking from the front like this.


This side is like this.


According to the release source Links International, commercialization of a mouse equipped with a cooling fanworld's firstAnd that.


The state that the fan is actually rotating can be seen in the following movie.

I tried the world's first fan of a mouse with a cooling fan "MO-BLE 001 DTF" - YouTube


In addition, the nominal operation sound is 21.7 dB, and it is quiet quietly because the wind noise is hardly heard as a feeling actually used and the sound of "Vienna" which makes a little mottle is touched. In addition, the cooling performance was also quite powerful and it felt cold when used in a room where air conditioning around room temperature was around 25 degrees even in summer.

◆ Installation and customization of setting software

Start by clicking on the installer from the CD included


Afterwards just click "next" OK





Installation progresses automatically


Click "Finish" to reboot the PC and to use software for customization.


It is possible to freely assign functions to each button.


Double click speed and resolution can be set. The maximum resolution is 6500 dpi.


The LED color change screen of the mouse body looks something like this. You can choose from the colors red, light blue, green, green and pink to choose your favorite color.


Red


light blue


Blue is a picture for seeing almost the same as light blue, but even with the naked eye there was only a difference that was difficult to distinguish.


Green


pink


So, in addition to the customization function indispensable for gaming mouse, this mouse features the function that can prevent erroneous operation such as sliding mouse with sweat of hand while cooling fingertips and palm. Recommended for playing seriously such as FPS which requires long operation time and fine operation.

in Review,   Hardware,   Video, Posted by darkhorse_log