"HDD Regenerator" to restore unusable hard disk

It is unbelievable software to restore the hard disk that physically bad sectors occurred and can not be read with the power of software and make it available again.

What can be repaired is a physical error due to magnetic polarity change. Errors due to other physical damage can not be repaired as expected. However, since this magnetic error is roughly 60%, it seems that if you use this software you can recover with a probability of 60%.

The result of diagnosing the hard disk last timeAlthough it has already been found that it is receiving damage that is not usable at all, can it really be revived?

So I actually tried it.
HDD Regenerator
http://www.dposoft.net/#b_hddhid

With shareware of 59.95 dollars, the demo version will repair one sectors of bad sectors actually found first. Extreme story, restart every time you find one sector, and start over, you can repair all bad sectors. Although it is troublesome, since scanning can start from the middle of a sector at once, if it is within 10 sectors, it is practically restorable if only persevering. Although it is expected to be broken as much as 1000 sectors indeed ....

This time it is a challenge with a 20 GB hard disk.

Then download and install it. Click "Next"


Please check the upper one and click "Next"


Click "Next"


wait


Click "Finish"


Icon like this appears on the desktop so click on it


Press the left to create the ISO image and press the right side to start writing to the floppy. I decided to use floppies this time.


Insert the floppy disk in the floppy disk drive and click "OK"


wait


Completion. Unplug the floppy disk and click "No"


Then insert this floppy disk into the floppy disk drive of a broken laptop on the hard disk and turn on the power.

During startup…


You started to move ...


It started safely. Press the Enter key.


Start from the first sector, so press Enter as it is. To specify from the continuation, enter the starting sector number here and press the Enter key.


Scanning ...


You seemed to have found and repaired one immediately, wow


So, I restarted about 10 times and restored about 10 bad sectors, but I bought a product version because it does not end in any way.

And the result is kore. Of the 1379, it seems that it was able to repair up to 1238. Calculation will be 89% recovered.


Results are listed in this way. It seems that you can not repair a totally broken part ...


When I restarted with a feeling of praying to God, it is supposed to have stopped starting with infinite loop, but it is supposed to start properly!

However, there is an error ... Although you can directly access each drive via Task Manager, it will rigidly raise errors when moving a bit. It will be displayed again until you run the check disk.


So run the check disk ...


As a result, no error occurred and it was completely restored. It is very good.


In the meantime, no data disappeared, I could rescue safely, and at the end of the phrase I started to run normally.

Nonetheless, since it is a hard disk that produces only this error, it is true that it is better to replace it .... In the meantime it is considered a realistic solution to make a full backup and move to a new hard disk.

But it really means to be able to start ... odoroki.

2006/08/11 14:12 Addendum:
According to the developer, it is said that it can be revived with a probability of 60%, not 90% probability. So I fixed the notation.

2014/07/12 17:48 Addendum
Prices have been raised from $ 59.99 to $ 99.99.