Three-dimensionalization of that "Samothrace's Nike", furthermore it can be combined with "Miro's Venus"

"Nike of Samothrace"That is the statue of the victorious goddess Nike held in the Louvre Museum, the real thing is the huge thing that the height is 328 cm.

This is the real thing


And thisOne Fest 2018 [Winter]"Nike of Samothrace" which was exhibited at the Goods booth of


"On sale"Venus of figma Milo"You can use the head and arm parts of


It will be like this when it coalesces


I do not want to say "Do not restore with a combination that is incompetent!", But there are reasons for this.


Official explanation of the Louvre MuseumIt is written as follows.

The right wing that is attached at the moment is the one that took the mold with the left wing reversed. Two fragments of the real right wing remained, and when analyzed it can be inferred that the wing was standing outwards at a higher and higher angle. From the very small pieces of the right arm, you can clarify the arms' stance. Slightly away from my body, I bent my elbow upwards. A small statue of the victorious goddess of terracotta excavated in Murina historic sites in Turkey tells us what the movement of the arm was like. It was thought that the goddess of victory would have had a trumpet, crown, thin band, etc on the right hand. However, in 1950, this hand was excavated on Samothrace Island (present Samothraki Island). As I opened the palm of the hand and the two fingers were stretched, on the right hand, I did not have anything, just that I was doing a greeting.

Both legs carved separately are not present, but the position of the foot can be restored from the trace that remained on the surface of the place where the foot was attached. The right foot was placed on the deck of the ship and the left foot was floating in the air. The goddess of victory is not walking, but it has gone down to the surface of the pedestal.

Reproduction drawings based on those knowledge are as follows,"Venus of figma Milo"By using the head and arm parts, you can bring it to a fairly nice place.


In addition, the prototype production is Tatsuya Ishibashi (MIC), production cooperation is Max Factory, the release timing is undecided, and the price has yet to be determined.