Seal type reflector "FLECTR 360" which reflects brightly any light, realizes design, safety and driving at a high level

While driving on a bicycle at night, a bicycle reflector (Reflector) that can run while keeping the design of the bicycle, besides being shiny glittering from anywhere 360 ​​degrees,FLECTR 360is. Due to its unique technology and mounting method, it strongly reflects light received from any direction to dramatically increase safety, further keeps the air resistance and weight balance of the wheel and the design of the entire bicycle in a high state It is possible.

FLECTR 360 - The wheel reflector with 360 degree visibility
https://www.flectr.bike/pages/flectr-360-specifications

You can see how the FLECTR 360 reflects the light it receives by looking at the following movie.

FLECTR 360 - the bike reflector with 360 ° visibility - YouTube

"FLECTR 360" is the front and rear wheels of the bicycle, receiving light and reflecting white.


It is like this when a bicycle equipped with FLECTR 360 is running. Thousands of metallic small prisms used for the material strongly reflect light, rotate together with the wheel, and draw a locus of light. As for the author of FLECTR 360 in the pastkickstarter's projectReflector for bicycle "FLECTR ZERO"ofProductizationI have a successful track record.

The FLECTR 360 is designed to reflect the received light over a wider area than the conventional reflector. The following image is an image of seeing the reflected state of light received from overhead. The upper is FLECTR 360, the lower is the conventional reflector.


When installing FLECTR 360, it is possible to reflect light strongly without choosing the surrounding environment. For example, even in towns with outdoor light ......


It also shines powerfully even on mountain roads where the outlook is hard to get used to. When crossing the road it reflects the light of the headlight of the car basked in and it keeps us aware of its existence so that safety increases.


Official siteAccording to the description, FLECTR 360 uses its own three-dimensional flexible material, it is difficult to peel off with a highly reliable adhesive, it is hard to wrinkle, and it is supposed to repel dirt.


In the case of reflectors of the type to be worn on spokes, if the safety is emphasized, the size gets larger, causing problems such as an increase in weight, a decrease in designability, an increase in air resistance, a deterioration of the weight balance of the wheels ... ...


Safety will be sacrificed if reflector of type attaching to spokes which emphasizes weight balance of air resistance and wheel is small, the reflector part becomes small.


On the other hand, since FLECTR 360 is lightweight and can be affixed to the rim part of the wheel, it is possible to establish elements such as reflection area, air resistance, weight balance of wheels at a high level.


How to choose FLECTR 360 according to my bicycle
FLECTR 360 can be mounted on various types of wheels. High profile (= rim thick) wheels used in road bikes, ordinary rim height wheels ......


It can also be used for mountain bike and wheels such as city cycle, and bicycles for common rim brake wheels.


Products are lineuped according to the height of the rim, so you can choose the size that fits your wheel.


There are 4 kinds of sizes, "for disc brake wheel" and "for rim brake wheel", each of "3 types for" disc brake wheel "and 1 type for" rim brake wheel ".


The size list which is line up is as follows.
· For disc brake wheel · Size 4 / large (size 4 / large):Rim height from 28 mm to 34 mm
· For disc brake wheels · Size 3 / medium (size 3 / intermediate):Rim height from 24 mm to 28 mm
· For disc brake wheel · Size 2 / short (size 2 / short):Rim height from 20 mm to 24 mm
· For rim brake wheels · Size 1 / short (size 1 / short):Rim height from 20 mm to 25 mm

Such FLECTR 360 is looking for investment at Kickstarter of the cloud funding site. The target amount was 3000 euro (about 400,000 yen), but when we left 22 days until the deadline, we have already collected 32 thousand euros (about 4.28 million yen), which is about 11 times the target amount.

The investment plan is composed as follows. Priority notifications with insurance and tracking services will be sent to both plans after completion of the project, so if you choose the size of FLECTR 360 after agreeing, the product will be shipped.

· 17 euros (about 2200 yen):FLECTR 360 4 sheets included × 1 set (total 4 sheets)
· 29 euro (about 3900 yen):FLECTR 360 4 sheets included x 2 sets (8 in total)
· 39 euros (about 5200 yen):FLECTR 360 4 sheets included x 3 sets (Total of 12) * Buddy Pack
· 49 euros (about 6600 yen):FLECTR 360 4 sheets included x 4 sets (16 total) * Family pack
· 88 euros (about 11,800 yen):Four pieces of FLECTR 360 × 8 sets (24 total) * Community pack

Shipping to Japan requires a separate shipping fee of 7 euros (approx. 930 yen). The deadline for investing in FLECTR 360 is Japan time, scheduled for December 30, 2017 (Sat) 18 o'clock in the year 2017, and shipment of products in February 2018.

FLECTR 360 - the first bike reflector with 360 ° visibility by The Outsider Team - Kickstarter