Breakdown of "Xbox One S" just released, character of the game appears from inside

As a new model of Microsoft's home video game machine "Xbox One", it was released on August 2, 2016 overseasXbox One S"As soon as iFixit of the disassembled group decomposed, the unknown contents appeared. It is also known that the character who knows anyone who owned the Xbox series protects the parts in the Xbox One S.

Xbox One S Teardown - iFixit
https://www.ifixit.com/Teardown/Xbox+One+S+Teardown/65572

Xbox One S is the world's best game show "E 3 2016"AnnouncementIt is 40% smaller than the previous model in the new Xbox One that was made, and it is a home game machine that supports video content of 4K Ultra HD.


The message "Hello from Seattle" is engraved on the back. This message is the same as what was written quietly on the controller of Xbox One.


Xbox One S has a power supply terminal · HDMI port for input · HDMI port for output · USB 3.0 port × 2 · IR output terminal · Optical Audio port · LAN port.


First, use the opener to remove the black cover on the bottom. According to iFixit, plastic fasteners fixing the cover and the main body are hard and it was difficult to remove them so that they are not broken.


When all fasteners are removed, the cover can come off from the power.


When removing the black cover it appeared that it was a metal case and we will remove it from the body cover using a screwdriver. The green screws remind the Xbox series.


Removing all the screws, it is possible to remove it together with the metal case.


Sabic and Samsung's logo, which seems to have supplied parts of the case of Xbox One S, was stamped on the plastic case that was left.


Removing the top of the metal case while lifting it with a hand ......


The contents of Xbox One S became visible.


If you look closely you can see the game "HALO"Master chief appearing in the exhibition is engraved. It seems that it protects the optical drive from users who disassemble the main body.


Boards on the front panel can be easily removed by lifting them from bottom to top.


On the front panel board, the "eject switch (light blue)", the wireless module "MediaTek"MT 7632 TUN"Power switch (green)" "Switch that synchronizes the wireless controller (orange)" "IR blaster (yellow)" is installed.


The Wi - Fi board on the side can be removed by removing the fastened screw with a screwdriver. On the Xbox One, iFixit praised that Wi-Fi board was behind Xbox One S, "It's less time to dismount than the previous model".


The Wi-Fi module on the Wi-Fi board uses MediaTek's "MT 7612 UN"is.


When it comes to this stage, iFixit will do the task of removing the screws randomly and checking which parts to remove first. As a result of removing the screws, the first thing to be removed is the hard disk.


Hard disk is made by Seagate 2 TB "(PDF)Spinpoint M9T ST 2000 LM 003It was a model called.


Just by pulling the optical drive by hand, it can come off from the black case.


The Blu - ray disk drive is made by Philips & Lite - On Digital Solutions, a model called "DG - 6 M 5 S" which is slightly different from "DG - 6 M 1 S" used in Xbox One.


Next, remove the internal power supply. The Xbox One S has built-in power supply to remove the AC adapter which was the previous model.


The built-in power supply was manufactured in China. It is said that it became difficult to remove it with power supply built in.


Next is the motherboard to disassemble.


Supporting the big fan from the back of the motherboard was a metal part shaped in X. The screw is green again.


Remove the fan by removing the green screw.


Aluminum heat sinks and copper heat pipes were used for the fans.


Finally the motherboard of Xbox One S appeared. Samsung "SEC 549 K4W 4 G 16 (orange)" loaded with 16, AMD 1.75 GHz / 8 core CPU (Jaguar) and Radeon series GPU included "X949211-001 DG 4001 FYG 87 I (red)", "X 861949-005 T6WD5XBG-0003 (Yellow) ", eMMC equipped with Toshiba's NAND type flash memory"THGBMFG6C1LBAIL(Green) ", ON Semiconductor's" NCP 4205 GASUY 1614 (light blue) ", Texas Instruments"SN75DP159(Purple) "from STMicroelectronics" (blue) "is carried.


There is only "RTL 8111HM" made by Realtek on the back.


After disassembling the main body of Xbox One S, disassembling the controller next. I will remove the fasteners with opener.


Since I can not remove the case even if I remove the fasteners, I found a screw hidden behind the sticker at the place where the battery was installed.


When I unscrew the screw and open the cover, I can see the whole picture of the contents of the controller.


A controller that was broken up. The contents are almost the same as the controller of Xbox One.


This completes disassembly. IFixit sets the disassembly difficulty score of Xbox One S to "8" in 10 steps. The closer to 10, the lower the decomposition difficulty, so it seems that Xbox One S is relatively easy to decompose. "Less of tools used for disassembly", "Simple design", "Simplified decomposition than previous model", and so on are the reasons for the score.