Released "Lumia 950 XL" decomposition report with Windows 10 Mobile, the identity of iris authentication sensor and liquid cooling system revealed

Microsoft 's new flagship model equipped with Windows 10 Mobile is a smartphone "Lumia 950"Lumia 950 XLHowever, before the launch in November 2015, a movie that has broken down the real machine of Lumia 950 XL has appeared.

Lumia 950 disassembly - YouTube


Several marks are displayed in the movie, but red and yellow squares and circles indicate that there is a fragile part and it is necessary to pay close attention. Yellow pins are displayed when showing specific parts or working positions. The trash can marks are displayed when showing packings etc. that can not be reused.


The tool used for disassembly is like this.


Lift the Lumia 950 XL back cover with your fingers ... ...


Remove.


When removing the battery pack, I will turn the 12 screws in total in the counterclockwise direction.


Then, the cover covering the chips and the like became disengaged.


Although we will disassemble the main board etc from now, firstly peel off the back cover of the battery.


"Display port connector" "Main board connector" "Side key connector" are connected in order from the top ... ...


Remove it all with a rubber head.


Furthermore, if you put a rubber spat from the location of the pin of the main board, the board will come off.


Be careful as the "front camera connector" is connected to the back side of lifting the board.


When the main board comes off, remove all parts as well. First, "camera connector" is removed.


"AV jack connector"


"MicroSD Card Reader Connector"


"Second card reader" is also removed, but the second MicroSD card reader connector is a procedure only for dual SIM terminals.


Removal of the parts of the main board will return to the main unit after all processes are completed.


Remove "eye I.D. sensor connector". It is a part that enables "Windows Hello", one of the important functions installed in the Lumia 950 XL, and can only be unlocked by displaying the face on the smartphone with the iris authentication.


There is also an instruction to remove support of the connector, and if you do the same procedure while watching the movie, it can decompose all components without hurting.


Using the rubber bead and tweezers, I was able to remove the "sub main board".


Removed with tweezers is "Front camera"


This is "vibration motor"


Remove "LED" ......


Almost only framework, L shape "heat pipe" emerges.NeowinLumia 950 XL can shoot 4K / 60 fps movies, can output to external HD (1920 x 1200) display, and at the same time has the ability to output different content on WQHD (2560 x 1440) display, so liquid cooling system It is explained as indispensable. The Lumia 950 XL is equipped with 8 cores of Snapdragon 810, but it is a concern as to whether we can deal with Snapdragon 810 with a longer heat pipe than usual.


The remaining "speaker" ... ...


"Flash" parts at the bottom of the camera


The LED cover of the camera part can be removed by pushing it from the back side.


It seems that the cover of the camera is pushed in from the inside and removed.


After that, if you remove fine packing etc., it is completely disassembled.


So when you disassemble all the parts, it looked something like this.