Metal scraping squash featuring both beauty and turning power "ForeverSpin 2.0" review

Even with GIGAZINEPrevious reviewsI did it, movie "InceptionTotem-like frame appearing in "ForeverSpinNew version of "ForeverSpin 2.0"Has appeared. It became a frame which made ultra precise and beautiful form made by scraping out from a metal mass and it is said that the turning power has also been upgraded than in the previous version, so I actually tried turning the real thing by getting it .

ForeverSpin - Perfectly Balanced Spinning Tops
http://foreverspin.com/

The following movie shows how ForeverSpin 2.0 was actually turned around. You can see the state that it rotates almost without shaking and continues to turn around showing marvelous stickiness even if it seems to collapse.

ForeverSpin 2.0 turns upright when turned well - YouTube


"ForeverSpin 2.0" gathered funds at Kickstarter, so we invested and got various items.


This is a sticker, paper on which appreciation words are written, and a gift card.


ForeverSpin 2.0 is included in this small box, and each of the five boxes contains different material pieces.


Looking at the back of the box, it says "ALUMINUM (aluminum)" "24KT GOLD PLATED (24 gold plating)" "STAINLESS STEEL BRUSH (stainless steel brush processing)", so that the material and finish of ForeverSpin 2.0 in It is getting.


One box It is very compact with this size.


When opening with Pakari, there is a card written "Thank You" ......


I found a cloth bag under it.


Something shining golden in the bag.


I tried to take it out. This is 24 gold plated ForeverSpin 2.0.


Looking from the side, it has this shape.


Looking from directly above this way. Anyway, 360 degrees It is gold pika from anywhere.


The bottom surface is short and sharp protruded shape, so that it is possible to obtain stable rotation by reducing friction with a small installation area.


It seems to be okay to have long protrusions on the opposite side if you have them. However, it is also possible to turn this protrusion on the ground.


With a hand like this, just about thumbsize.


Pinch with the fingers of the longer protrusion and turn it like this. By exquisite balance adjustment and turning the shaft so that it does not shake, the frame turns as though it were standing upright.


In addition, the bottom of the box where ForeverSpin 2.0 was in had a cross to polish tops.


Besides 24 gold plating, I got a brush stainless steel material.


aluminum


titanium


And brass, a total of 5 types.


I arranged 24 gold plated · stainless steel · aluminum · titanium · brass from the left.


Placing 24 gold plating (left) and brass (right) side by side. The gold-plated one is reflexing the surface, whereas the brass made finish has a matte finish on the surface.


It is stainless steel · aluminum · titanium from the left. Aluminum is a bright silver color and titanium is a silver color close to black.


When measuring the weight, 24 gold plating is 27 grams.


27 grams of stainless steel.


Aluminum is 10 grams. This is very light compared to others, the level to understand the difference just by holding it in your hand.


Titanium is 16 grams.


Brass was the heaviest 30 grams.


Next, let's open the square box that came in with the set.


There is also a bag in this box ... ...


In the bag there was a stainless steel dedicated spinning table "ForeverBase".


ForeverBase is about this when you have it in hand, it is very compact.


So, I actually try ForeverSpin 2.0 on ForeverBase. Since ForeverBase is palm-sized, it seems to be more than the movie above it is harder than imagined to think about turning ForeverSpin 2.0 on this.

Turn ForeverSpin 2.0 on ForeverBase: Failure Edition - YouTube


You can see how you succeeded in turning the kinkle on the pedestal from the following movie.

Turn ForeverSpin 2.0 on ForeverBase: Success Stories - YouTube


In the movie above, ForeverSpin 2.0 has moved, and it makes sound while turning on the table. However, if you turn ForeverSpin 2.0 well enough to balance it, the frame stands upright as if it is stationary, and it turns without sound.


It was not possible to rotate ForeverSpin 2.0 upright on ForeverBase and it was successful to rotate quietly with almost no movement. If you look at the movie below, you can see how quiet and relaxed ForeverSpin 2.0 moves when balancing well.

ForeverSpin 2.0 turns upright when turned well - YouTube


Also, in ForeverSpin 2.0, it is also possible to rotate the long protrusion that was impossible with the previous model on the ground.


You can see the actual movie turning upside down in the following movie.

I turned ForeverSpin 2.0 upside down - YouTube


It is OK even if more than one can be turned at the same time.


If you are playing while turning ForeverSpin 2.0 from a high position, care should be taken because the surface of ForeverBase may be damaged.


At the end you can open a horizontally long box.


Among them was cloth bags.


What was in the bag is "ForeverDock" which can decorate ForeverSpin 2.0 like a figurine.


ForeverDock is made of stainless steel, the edge part isChamferingIt is being done.


There are five holes open so that you can place ForeverSpin 2.0 here.


That's why I put it in practice.


It brings out a luxurious feeling which is unlikely to be a coma, and even if it is decorated as it is, it seems to be a sufficient picture.


I have never seen any more stylish comics ...... Has.


ForeverSpin 2.0 isForeverSpin StoreSelling at. ForeverSpin 2.0 made of aluminum is the cheapest $ 34 (about 4,200 yen) if it is a single body, and "Mini MetalMuseum" which was set with ForeverSpin 2.0 and ForeverDock made of 24 gold plated stainless steel, aluminum, titanium, brass Available for $ 225 (approx. 28,000 yen). The shipping fee is uniformly 16 dollars (about 2000 yen), but if you buy more than 69 dollars (about 8,500 yen) collectively it will be free shipping.

ForeverSpin ™ Store