I tried to make effective use of the dead space with the steel rack "Home Erector S & C" that can be custom-made in units of width 25 mm



Although there are strange gaps there is no way to discover by existing selling shelves and racks of the size fitted there in the home center and the existing set or parts selling themselves and installing unsightly things that will not suitably fit the dead space I think that it is a scene that often tends to coffee the tea somehow and then the operation ... but that does not mean that it is hard work to cut the timber from scratch from scratch with the do-it-yourself / DIY spirit fully open When I think about it, I tend to step on my foot and I will manage somehow ... ... Ugo.

This is a problem dead space.


Width of about 500 mm, unlikely size.


Put a castable recycle bin under the rack, put a pot and a rice cooker on the top shelf, and place instant coffee and tea packs if you like if possible. I put a pot and a rice cooker so it's hard to get rusted, and I want a caster in the rack to make it easier to clean up ... so I searched around here and found it on the net, , I can not find a perfect one ...... I wanted to call a "renter" of a certain renovation program Before after I was tormented by a desperate mood.


As a result of further searching variously, it was born in 1994, bolts and screws are basically unnecessary and easily assembled by anyone "Home Erector"In the series of what a shelf width (depth and frontage) is 25 mm increments, the height of the pillar can be ordered in 1 inch united"Size & color order systemDiscovered what is called. It is not a tasteful steel rack like chrome plating as is common, but you can choose your favorite color from all 8 colors according to the installation place, and because it is producing in Japan, it is high quality and it is high quality, like a kitchen It can be used without problem even in humid places, perhaps the perfect kitchen rack for putting pots and rice cookers! So, I actually tried ordering.

Home ERECTA
http://www.erecta.co.jp/home/sizeandcolor/index.html


8 colors of Ivory Brown Mist White Dark Red Navy Light Gray Matte Black Chrome. Seven colors other than chrome are semi-glossy finish polyester resin powder coating finish.


Height can be ordered in increments of 25.4 mm (1 inch)


The width and depth of the shelf board can be ordered in increments of 25 mm, which is amazing.


Unlike Home Eleca, which is located in home centers etc., it is custom made by handmade in our own factory in Japan, so delivery takes about three weeks after ordering on average, but from the following home erector official online shop It's very easy to order with.

ERECTA Official Online Shop / Home Erector Size & Color Order
http://shop.erecta.jp/products/subcategory_list.php?category_id=8


For this time, we selected "light gray" color to match the wall which is based on white and flooring, taking into consideration the width of the caster with stopper, so that it fits in the gap of about 500 mm in entrance, the shelf part I tried ordering. I ordered on July 3 (Sunday), it was shipped on July 15th (Friday) and arrived on Saturday, July 16th. I received it within two weeks of order from hand.


"Order post light gray height 910 mm 1 pair (2 pieces)" as the pillar of the front part, 5460 yen.


Opening while throbbing. Oh, surely the color is different from ordinary home erector, and it is calm light gray.


The texture of the semi-gloss finish powder coating is pretty good.


"Order post light gray height 1519 mm 1 pair (2 pieces)" which becomes the back side pillar, 6300 yen.


It is also nice to be able to order things of just the right feeling length.


Very long


Next is the shelf board that puts instant coffee and tea pack "Order shelf light gray depth 300 mm × frontage 475 mm", 5880 yen.


Because it will support with two pillars instead of four pillars, it will depend on ordering shorter depth.


Next is a trash can with casters "Order three way crossbar light gray depth 475 mm × frontage 475 mm", 6300 yen. Place the pot & rice cooker "order shelf light gray depth 475 mm × frontage 475 mm", 7245 yen.


This is the essence of this tailor made.


Lastly "WEB limited elastomer casters with white stopper 1 pair" × 2, 3360 yen.


A smaller box in the box


The reason why we made this caster is because black like rubbish dropped off as we used it as a commonly used casters with one step grade lower than this used in the office. This elastomeric caster can also be lightly moved, and such unfortunate deterioration should be avoided.


Together, tax included 37,905 yen, shipping fee was free.


Tapered sleep to fix the plate is transparent, so colors are made to look good.



That's why assembly started. First, set the three way crossbar and check the width


Oh, perfect!


The thing that looked for that much and did not find it finally got this hand.


I'm impressed with the ground. This feeling is the joy itself when it was found even though I could not find a thing that fits perfectly into the dead space.


In this way I attached tapered sleep to the pillar and I decided to insert a three way cross bar.


Good point


Something like a Cannon cannon at the stage of attaching 4 pillars ...


I tried it


I tried putting a trash can. It is as the image is.


I installed a shelf board and put pot & rice cooker on it. Oh, so that you do not have to squat down each time!


I set up shelves about half in depth at the top, and put instant coffee and tea packs. It looks like convenience.


It looks like this from the side, and the top shelf is supported by two pillars, but it has high strength, so there is no problem.


It looks like a bright spot


Finally installing casters


Even with the casters attached, it fits well without problems. There is no problem moving.


Finally we succeed in getting a wishful kitchen rack! What is that! At this stage in the brain"Takumi" BGMThere is flowing.


Now that the part before the dead space can be effectively used, we plan to set up a rack with custom made also in the back part and make it more perfect comfortable space. Somehow fun.

In addition, this time I made a custom made with the momentum to make clearly furnished furniture, but see the introduction movie below to find out more ways to use it.

Home Erector Size & Color Order - YouTube


Because I did not expect that the thing as imagined so far was completed, it is a level where it dances on alone after completion. It is highly recommended for those who are irritated because they can not make racks of the desired combination and size.

in Review,   Hardware,   Video, Posted by darkhorse