I tried making a cutting sheet for pain for chari

Pain careven ifPain chariAlthough I was shooting "This is amazing!", I thought that there was no way I could make it myself, but "Machi ★ Assortment 3At the boardwalk there was a pain creation production corner set up, and an event to make a cutting sheet and return home with 300 yen was done. Because I was told that he would also lend the tools, I tried making it by saying that once I tried to make out what it is like ....

Details are as below.
Distant view of booth where sheet production is done.


This time it is the letter "Machi ★ Assobi". By the way, Tomizawa P of NAMCO BANDAI Games also created this sheet and stuck it on my bicycle.


The working process is like this.


First select the color of the sheet and paste the character you want to cut out there.
YouTube - I tried making a cutting sheet for pain for me part 1


Then we cut out the contours of the letters. Be sure to do the points from the part inside. This part is the part cut out inside the star, so this time it is starting from here.


Cut out the outer contour of the character and remove unnecessary parts.



Apparently progressing ... ....


I completely peeled off like this. This part was also reusable, so I had you paste it on a clear file.


When I peeled off the tears and white paper, a yellow sheet appeared from the bottom.


A little white paper remained dirty, but there is no problem at all.


With this brake cleaner it is possible to take unnecessary paper left behind and the surface of the sheet sticky. I thought that the 840 ml can is quite deck, but it seems to be quite useful so it seems no need to worry about this.


Attach the brake cleaner to the tissue, soak it into the paper, and strip it with the nails. It seems that this time it was made into a tissue considering the cost, but since it is a tissue when it is a tissue, it is said that kitchen paper is preferable if possible.
YouTube - I tried making a cutting sheet for pain for me part 4


Clean dust removal. Machi ★ Asobi clear file is complete.


I will peel off the white paper on the top of the letters to put on my bicycle.



After peeling off, paste the masking tape.


Although it seems to paste masking tape almost without overlapping when it gets used to it, it seems that it would be better for you to paste it with a little margin if it fails.


I will stick it carefully.



I could do it.


After that, peel off this masking tape from the backing so that the characters stick to it, paste them on the bicycle and if you firmly attach the letters to the bicycle, remove only the masking tape and it's done.


By the way, although there was a comment in the movie of the previous spray glue used, it is a type that peels off even if it is pasted.


It was that things made by 3M are easy to use.


So we start to paste the bicycle. In this way, the mount and masking tape are easily separated. At this time, it seems that small parts may remain on the mount, so be careful.


Let's select the place to paste before peeling off the seal from the backing.


Paste on it.



And peel off only the masking tape.



Completion


This time I cut only letters, but if I apply this it can clip anything in illustration. It was about 45 minutes from the start of work to completion of pasting the masking tape with this thing.


Here is the state of cutting of the gurus at the umbrella. It seems that the person who guided cutting this time was still about 2 months of cutting history, and these people said that they are not good compared.


I was concentrating on working as I could call out. By the way, it seems that the finished product of this sheet was handed over to the live doppler cat.


Another artisan.



It is being cut finely.
YouTube - I tried making a cutting sheet for pain for me part 2


YouTube - I tried making a cutting sheet for pain for me part 3


Work will proceed while looking.


Since it seems to use only the middle character this time, we remove other character parts.


After cutting out all of the outside, we will peel off the seal of the contour part.



It seems that it will peel off to the necessary part ... ....



Almost completed.


Is it the final finishing? What does this mean to proceed so much in 45 minutes, which is struggling to produce characters?


By the way, the original illustration is here.


I thought that the hurdle seemed to be high before doing, but when I tried it it turned out that I could make it quite well if time to come. As all the tools are available at home centers, etc., why do not you once try challenging anyone who wants to make it.