Review of Dyson Micro 1.5kg (SV21 FF), a Dyson cordless vacuum cleaner that weighs only 1.5kg and is super lightweight and can be used everywhere.
Dyson Micro 1.5kg is a cordless vacuum cleaner that can be easily lifted with one hand because it weighs only 1.5kg, is easy to carry because it is cordless, and can clean walls, ceilings, car seats, etc. (SV21 FF) 'has appeared on Thursday, October 8th. It seemed to be convenient, such as being able to dispose of garbage without touching the dust that was sucked up, being able to wash the filter with water, and having one unit double as a futon cleaner or handy cleaner, so use it to see what it actually looks like. Saw.
◆ 2: 6 parts that can be used properly depending on the application
◆ 3: I actually cleaned it in various ways
◆ 4: Charging method and summary
Dyson Micro 1.5kg (SV21 FF) ｜ Vacuum cleaner ｜ Dyson
https://www.dyson.co.jp/dyson-vacuums/cordless/dyson-micro/dyson-micro.aspx
◆ 1: Opening & appearance of the main body looks like this
This is the Dyson Micro 1.5kg (SV21 FF) package.
When I opened the box, I saw the instructions and parts. The Dyson Micro 1.5kg comes in pieces, so it needs to be easily assembled.
I took out all the contents of the box.
This is the vacuum cleaner body. The weight of the main body only is about 1 kg. The size is 8.5 cm wide, 29 cm deep and 22.2 cm high.
At the top of the main unit, there is a button labeled 'MAX' and a power switch. MAX is a button to switch to so-called 'strong' mode. Since the main body has a built-in battery, you can turn on the power without attaching any parts, but you need to attach various parts to use it properly.
There is a hole in the front of the main body for attaching parts, and parts such as the head shown on the left side of the photo can be inserted into this hole.
The purple part at the back is a filter. If you turn it counterclockwise a little and pull it out ...
I was able to remove it quickly. According to Dyson, cleaning is required once a month.
The entire filter can be washed with water.
When it is removed, pressing the power switch does not respond.
The power cord looks like this. The main body arrived in a state of being charged to some extent, but I will charge it just in case.
Insert the plug into the socket on the front of the bottom of the main unit.
Since the plug is inserted sideways, it is also a point that it does not interfere with other plugs.
When charging starts, the lamp at the bottom of the main unit flashes blue.
◆ 2: 6 parts that can be used properly depending on the application
The included parts are a total of 6 parts: cleaner head, mini motor head, combination nozzle, desktop tool, storage bracket, and tool clip. I will check each part. First is the main cleaner head. It is designed to bend a little sideways.
The head can be bent up and down about 45 degrees.
The width is about 21 cm.
The following is an extension nozzle with a length of about 80 cm. If you attach a head cleaner directly to the main body, you can use it as a handy cleaner, and if you attach each head to the extension nozzle, you can use it like a normal vacuum cleaner.
Next is the 'mini motor head'.
The back is brush-shaped. It is ideal for cleaning sofas and futons.
This can also be bent up and down about 45 degrees.
Next is the 'desktop tool'. Compared to the main cleaner head and transportation IC card, you can see that it is smaller so that the desktop can be easily cleaned.
The back is like this. You can remove fine stains with the brush in the red part.
Attaching it directly to the main body makes it easier to clean at hand.
This is a 'combination gap nozzle'. The following has a combination gap nozzle attached to the extension nozzle, which makes it possible to clean narrow places that are out of reach.
The brush can be used by pressing the gray button and sliding it forward.
This is a tool clip.
If you attach a combination gap nozzle or desktop tool to the tool clip and fit it in the extension nozzle, you can replace the parts immediately during cleaning.
◆ 3: I actually cleaned it in various ways
I will actually use it. Since it has been downsized, we will check the usability in narrow places and high places. First is under the cupboard at the bottom of the kitchen.
There is a
Even after Rumba has passed, the garbage is still scattered as shown below ...
In this case, the vacuum cleaner body + extension nozzle + combination gap nozzle is combined to suck up the dust in the narrow gap that Roomba cannot absorb.
No problem even in narrow places such as between the refrigerator and the wall.
As it weighs about a 1.5L PET bottle, it can be lifted and cleaned with one hand even in high places.
Next is the part of the stairs where Roomba cannot go up.
You can clean this with the main body + extension nozzle + main cleaner head.
The last is in the car. It is cordless and light, and it is a nice point to be able to easily carry it to places where power does not reach. In addition to sucking up dust on the floor with the combination of the main body and the combination gap nozzle ...
You can also attach the mini motor head directly to the main body to clean the seat at a short distance.
To dispose of garbage, push the red lever at the bottom of the main unit and slide it forward.
The lid pops open and you can just throw away the trash.
Furthermore, it is also possible to remove the whole by pushing the lever in this part and pulling it out. When the trash can is far away, it is also convenient to be able to separate the trash can from the main body and carry it.
◆ 4: Charging method and summary
The Dyson Micro 1.5kg (SV21 FF) also comes with a charging dock such as: The Dyson Micro 1.5kg (SV21 FF) is not a type that charges by leaning against a stand, but a type that fixes the charging dock to the wall with screws and vacuums the dock to charge. To store and charge with the stand type, you need to purchase a
Pass the power cord from the back side of the left part.
Pull it from the back and attach it to the central pedestal.
Close the lid until you hear a click.
Crawl the cord on the back side.
Then attach another part.
It's done by closing them together.
It looks like this when you plug it in and mount it on the wall. As with the main body, parts can be inserted and stored in the two holes at the bottom.
When you insert the handle of the main body into the recess of the dock, the charging plug will be inserted. When I actually set it, I could confirm that the blue lamp indicating that it was charging was shining.
When I actually used it, the biggest point was that it was light and easy to carry, and it is good that I do not feel too tired even if I use it for a long time. Taking advantage of its lightness, cleaning on the desk or at a slightly higher position seemed to be easier than with a general cordless vacuum cleaner. However, the battery lasts only 20 minutes in normal mode due to the smaller size, and if you inhale a lot of paper such as tissue paper or garbage of the size of a 500-yen coin, the nozzle will be clogged and the garbage will be removed each time. I felt that it was a little difficult to have to throw it away.
Dyson Micro 1.5kg (SV21 FF) can be purchased from the Dyson official website for 64,900 yen including tax.
Dyson Micro 1.5kg (SV21 FF)
Related Posts:
in Review, Posted by log1p_kr