I compared the 2nd generation iPhone SE equipped with 4.7 inch Retina HD display with successive models such as iPhone 8 and the first iPhone SE



The 2nd generation iPhone SE released on April 24, 2020 has a similar design to the iPhone 8 released in 2017, with a 4.7 inch Retina HD display and A13 Bionic chip at a price of 40,000 yen. It is a model. I compared how it looked different from the previous iPhone series with the iPhone 8 and the original iPhone SE.

iPhone SE-Apple (Japan)
https://www.apple.com/jp/iphone-se/

You can check how the second generation iPhone SE is opened in the following article.

2nd generation `` iPhone SE '' that can be obtained from the 40,000 yen range & haste photo review-GIGAZINE



◆ Compared to iPhone 8
The second-generation iPhone SE, which measures 138.4 mm in height, 67.3 mm in width, and 7.3 mm in thickness, is the same size as the iPhone 8 released in September 2017. Comparing the second generation iPhone SE (left) and iPhone 8 (right), the logo position on the back is slightly different and there is a design difference that the character string of `` iPhone '' is gone, but the size and shape Are almost the same.



Both screens feature a 4.7-inch Retina HD display.



Both the second-generation iPhone SE and iPhone 8 have Touch ID, and the home button is located at the bottom of the screen.



Both show the same picture with the True Tone setting turned off and the brightness raised to the maximum value. There is no difference in image quality, but it's hard to understand as an image, but I felt that the iPhone SE on the left had a slightly warmer color.



A 12-megapixel f1.8 wide-angle camera, an LED True Tone flash, and a rear camera module that popped out slightly from the back are the same as the iPhone 8.



Side button, SIM card slot, right side with two antenna lines



Left side with sound on / off switch, volume control button, and two antenna lines



The point is that six speaker grills are placed on the left and right of the Lightning terminal. The iPhone 8 has been discontinued on April 16, 2020, when the second-generation iPhone SE was announced.



◆ Comparison with the original iPhone SE
Let's compare it with the first iPhone SE (left) released in March 2016.



If you repeat it, you can see that the 2nd generation iPhone SE is one size larger than the first generation.



The first generation was a 4.0-inch Retina display and the second generation was a 4.7-inch Retina HD display. Both have a pixel density of 326 ppi.



The first generation has flat sides, but the second generation has a curved surface. In addition, the 3.5mm audio terminal used in the first generation has been removed from the second generation.



The shape of the volume adjustment button has also changed from a round shape to an elongated shape.



In the first generation, the rear camera module was flush with the surface, but in the second generation, the rear camera module popped out from the back.



Stacked iPhone 11 with the same A13 Bionic chipset as the 2nd generation iPhone SE. After all, it is clear that iPhone 11 is one size larger.



The second-generation iPhone SE has a 4.7-inch Retina HD display, while the iPhone 11 has a 6.1-inch Liquid Retina HD display. Unlike the iPhone 11, which has a notch called a notch to make the bezel as narrow as possible, the iPhone SE has a bezel at the top and bottom of the screen and has a different aspect ratio.




From left to right, first iPhone SE, iPhone 8, second-generation iPhone SE, iPhone X, iPhone 11, iPhone 11 Pro Max. Basically, the display size has increased as it evolved into a new model, and the 2nd generation iPhone SE is an iPhone with a display of less than 5 inches for a long time.



When the male editorial staff holds the first iPhone SE of 123.8 mm in height × 58.6 mm in width × 7.6 g in thinness, it can be held by the second joint of each finger and the base of the thumb. Because of its small size, it's a perfect impression to say “grip” rather than “pick it up”, and it felt quite small for editorial staff who were used to iPhone X and iPhone 11.



With a height of 144.0 mm x width of 71.4 mm x thinness of 8.1 mm, the iPhone 11 is slightly larger than the second-generation iPhone SE. When held with the right hand, only the right half of the screen can be covered with the thumb, and moving the thumb makes it difficult to hold the iPhone 11.



And a male editorial staff brought the second generation iPhone SE. It's a size that can be held firmly with the first joint of each finger and the base of the thumb, and the impression that you can freely operate 70 to 80% of the screen with your thumb while holding it in your right hand. The second-generation iPhone SE is a recommended model for those who say, 'The recent iPhone is getting too big and hard to hold.'



・ Continued
A13 Bionic & 3rd generation Neural Engine & RAM 3GB installed compared to the benchmark score of `` 2nd generation iPhone SE '' priced at 40,000 yen with iPhone 8 & iPhone 11-GIGAZINE

in Review,   Mobile,   Hardware, Posted by log1i_yk