I compare how iPhone XR's design differs from iPhone XS / XS Max

Finally " iPhone XR " appeared, all the new iPhone · 3 models announced in 2018 became available. The 6.5-inch iPhone XS Max of the largest size, the 5.8-inch iPhone XS which becomes the successor model of iPhone X, and 6.1 inch iPhone XR which can be purchased at the most affordable price among the iPhones which appeared in 2018 3 There are many people who do not know well what is different about one model. So, I compared the design of iPhone XR which I got at once, compared with iPhone XS and iPhone XS Max.

iPhone XR - Apple (Japan)
https://www.apple.com/jp/iphone-xr/

IPhone XS (length 143.6 mm × width 70.9 mm × thickness 7.7 mm, weight 177 g) from the left, iPhone XR (length 150.9 mm × width 75.7 mm × thickness 8.3 mm, weight 194 g), iPhone XS Max (length 157.5 mm × Width 77.4 mm × thinness 7.7 mm, weight 208 g). As for the difference in the back side, the size is increasing by one turn in the order, while the iPhone XR camera is a single lens, whereas iPhone XS and XS Max adopt dual lens Yes.

Red is the iPhone XR camera, and the other is the iPhone XS camera.

The degree of excitement of the camera is about the same degree.

From the top, stack iPhone XS, iPhone XR, iPhone XS Max in this order.

The vertical length is about 7 mm longer, and the difference is apparent between iPhone XS and iPhone XR. However, iPhone XR and iPhone XS Max were levels that did not know the difference in width.

On the top surface, no buttons etc are arranged, iPhone XS / XS Max contains one antenna line for radio, this line is not included in iPhone XR Hmm.

Bottom part with speaker and Lightning connector. Even here the iPhone XS / XS Max contains an antenna line for radio waves, but it is not on the iPhone XR. In addition, although iPhone XR has become symmetrical appearance centered on Lightning connector, iPhone XS / XS Max is asymmetric left and right.

The volume control button and the sound on / off button on the left side are the same placement.

right side. At first glance it looks similar, iPhone XS / XS Max is located in the center of the side where the SIM card slot is located on the right side of the side.

Also, the antenna line for side radio waves is thicker only for iPhone XR. In addition, iPhone XS / XS Max is a striking finish with fingerprints and reflections, as the stainless steel frame is mirror finished, whereas the iPhone XS / XS Max has an aluminum frame on the side that makes it difficult for the fingerprint to stand out .

IPhone X leather Folio case which is a special case of Apple genuine iPhone X installed, it will be about the same size as iPhone XR (right).

I continued to turn on the display. IPhone XS (5.8 inch, 2436 × 1125 pixel resolution, 458 ppi) from the left, iPhone XR (1792 × 828 pixel resolution, 326 ppi), iPhone XS Max (2688 × 1242 pixel resolution, 458 ppi).

Compared to the notch part of iPhone XS (left) and iPhone XR (right), the notch of iPhone XR was a bit bigger a little.

Also, when comparing the bezel width of iPhone XS / XS Max (left) and iPhone XR (right), the iPhone XR is obviously thick.

The iPhone XR and iPhone XS / XS Max I thought that it looked the same as the camera on the back except it was the same look, but when you actually compare it, the antenna line and bottom design, the location of the SIM card slot, and I was able to find multiple differences in the bezel width and small details. Still the iPhone XR has a handy feel with a glass panel and aluminum frame that will be attached to the hands, and it is rich in color variations, so the route from the iPhone XS / XS Max to the design is different but the design is quite quiet I felt it was finished to not take.