Apple has announced its official view on the 'distorted iPad Pro', and more stringent standards are adopted for flatness than ever

In response to the fact that some confusion occurred, such as users who asked for returns, a series of reports that "Removing a brand-new iPad Pro from the box was distorted", Apple is official page and a new design of iPad Pro I explained the situation. According to it, the distortion of the new iPad Pro seems to have the possibility of "optical illusion due to design".

iPad Pro unibody enclosure design - Apple Support
https://support.apple.com/en-us/HT209403

Numerous reports were reported on the bulletin board of the 3rd generation iPad Pro, and a lot of reports came up on the bulletin board of MacRumors , and as a result of Apple responding to "Verge" which confirmed the facts, "development ( speculation in the spec)", it developed into a disturbance .

Some users had to replace the distorted iPad Pro with fluctuating level of fluctuation when placed on a flat desk, but some of them said, "The iPad Pro who exchanged was more distorted" Bad users also appeared.

According to Apple, the 3rd generation iPad Pro adopts a strong and light aluminum body enclosure to achieve unprecedented thinness of 5.9 mm. And, in order to utilize the Gigabit class LTE line, the antenna is arranged by digging a small groove on the side, injecting the plastic antenna into the high temperature aluminum body and bonding it seamlessly by cooling after bonding, "co -molding "(simultaneous molding) is adopted as a special manufacturing method.

Although iPad Pro realized ultra-thin design by adopting a new manufacturing method, Apple said that strict specifications are set for flatness than the previous generation. Specifically, it seems that only a few deviations less than four sheets of paper less than 0.4 mm per side are allowed. Nevertheless, Apple's complaints about the distortion of iPad Pro is that Apple is "because of the design that was split by straight edges and antennas, only when viewed from a special angle that is not normally available, Distortion may be visible ". And for a slight distortion of 0.4 mm or less, Apple explains that iPad Pro itself has no influence on the strength of its own, as well as the distortion of the housing itself, which will change over time.

Although Apple says that slight distortion is not a problem in functionality, but if you feel that it does not meet the specification "0.4 mm or less per side" at the same time, iPad Pro purchased directly from Apple will be within 14 days Since it is possible to return it if it exists, we also want you to contact support.

Although it is unknown whether Apple's "less than 0.4 mm per side" criterion is tough or not, it can be swayed with a rattle on a flat desk or the light leaks from the side with the screen facing down like the following movie Whether there is no level of distortion to exit, it seems better to check it as soon as you purchase it.

Would you be able to see the screen if it was flat on Vimeo