Unibody 3D printer "TIKO" which can enjoy highly accurate output at about 20,000 yen

While it is easy to carry in compact size, you can enjoy high precision output with resolution of 50 ~ 250 microns, and output data can be created with browser-based modeling software "TIKO"is. Although it is available at affordable price of about 20,000 yen, various parts are designed by the user's eyes, and it has become very usable one.

TIKO
http://tiko3d.com/

You can tell what kind of 3D printer TIKO is by watching the following movie.


Many conventional 3D printers are large in size and can not be carried by one person, and furthermore, there are many things such as part misalignment and inaccuracy of output stand out.


It is TIKO that draws a line with such a 3D printer.


The output nozzle extends from the inside of the main body ...


It is possible to output as it is.


Nozzle is supported from three parts inside the body, and it moves freely within TIKO.


The size of TIKO is as follows. Height 390 mm × width 237 mm × depth 221 mm, body weight 1.7 kg.


The main body is unibody and there is little deviation of parts etc. Minimize influence on output.


Because it is compact size, it is easy to carry.


Available output filaments are 1 kg standard size, and available materials are plastic · ABS resin · nylon · HIPS etc.


Furthermore, since the output space is prepared inside TIKO, it is ok without considering the influence of wind etc. which becomes an obstacle when using a 3D printer ......


You can use it regardless of location or environment.


It is possible to output such fine detail.


TIKO does not use expensive parts, but you can enjoy high precision output. This is the result of TIKO's unibody design and the delta nozzle supported from three parts inside the main unit, and the output corresponds to the resolution of 50 microns to 250 microns.


The outputable size is 138.3 cubic inches (about 2266 cubic centimeters).


The 3D model for output with TIKO can be rendered with browser based software. In addition, it is possible to output with STL file which is most widely used as 3D printing data.


TIKO has built-in Wi-Fi, you can print from PC or smartphone by remote control.


Such TIKO is collecting more than 420,000 dollars (about 50 million yen) exceeding the target amount of 100,000 dollars (about 12 million yen) already while recruiting investment at Kickstarter, Sure. It is possible to get one TIKO with a capital of 179 dollars (about 21,000 yen), although shipping fee will be charged separately, it will be less than $ 65 (about 8000 yen).

The deadline for investing in "TIKO" is 3 AM on May 1, 2015.

Tiko - The Unibody 3D Printer by Tiko 3D - Kickstarter
https://www.kickstarter.com/projects/tiko3d/tiko-the-unibody-3d-printer