Bicycle pump head that can be installed with one hand with one hand "Rápido Pro"

When putting the air in the tire of the bicycle, it is unexpectedly troublesome to install the pump on the valve of the tube. Especially, in the case of Buddhist or rice valves, it is necessary to push up a short lever as "gut", which may require unexpected injuries as it often requires more force than we thought. In order to solve such inconvenience, the pump head that can be installed with one touch by adopting the ring type fixing method is "Rápido Pro"is.

The Rapido Pro Pump and Pro Pump Head
http://www.rapidopump.com/

What kind of product Rápido Pro is like is understood by seeing the following movie and so on.


This is a pump head part for tires that are often used for road bikes and mountain bikes. It is necessary to cause the lever visible to the photo to be fixed to the valve as "ugly", but there is a time when it is worried whether this requires unexpected force or whether it can be fixed tightly.


It is this "Rápido Pro" that resolves such inconvenience at a stretch. The conventional lever disappears, and a ring and a spring are attached to the tip instead.


Installation on a valve is very easy. Push up the ring and cover the valve ......


Just hold the ring part down firmly. This locks and it will not come off. Since it is easy to apply force, there is no need to perform unreasonable operation.


Easy operation when removing similarly. I easily pulled out by pulling out the ring with your fingers.


Also, the benefit of Rápido Pro is that it is compatible with both US and Buddha valves. In both cases, it was difficult to share the pump head because the diameter of the valve is different, but it is possible to handle a wide range with this one. After thatBirzmanYaLEZYNEIf it has a release valve that can adjust the air pressure just by pushing a button like that it is regrettable that it was Kampeki.


In addition, it is unknown how to deal with English bulbs widely used for so-called mushroom and so on. Although there is a possibility that it can be used as it is, it may be able to respond reliably by using the adapter of "rice / buddha style - English style" like the one below.


It is also possible to work with an electric pump, so it is Rakuchin.


Rápido Pro is a pump head that corresponds to American style and Buddha style tubes, and there is almost no worry of damaging the valve due to failure in installation. Since it corresponds to air pressure up to 120 psi, it seems not to be an exaggeration to say that it covers all uses for normal usage.


This Rápido Pro is a cloud funding siteKickstarterWe are looking for investment in. For the target amount of $ 34,000 (about 4 million yen), about 63,000 dollars (about 7.5 million yen) is gathered from more than 1,300 investors around the world at the time of article creation.

Rápido Pro can earn one by a contribution of 29 dollars (about 3500 yen), color can be selected from 5 colors. Plans such as 49 dollars (about 6000 yen) for two cases and 89 dollars (17 thousands yen) for 4 items are prepared.


In addition, it is also possible to get in the state of being set in the pump body with a contribution of 69 dollars (about 8300 yen). The pump body is made of reinforced plastic, color is black only. Here is also a plan for two deals (110 dollars, about 13,000 yen) that is also advantageous.


For shipments outside the United States, shipping fees of 25 dollars to 45 dollars (about 3000 yen to 5400 yen) are required separately according to the number and the item. The deadline of investment is Japan time on March 26 th (Thursday) 4:13 in Japan, and the shipping time is scheduled around July 2015.

The Rápido Pro Pump Head For Bicycles by Cliff Currie - Kickstarter
https://www.kickstarter.com/projects/1087940162/the-rapido-pro-pump-head-for-bicycles