Pen which realizes hand-drawn 3D print improved transcendence and appeared as "3Doodler 2.0"

A pen which can extract 3D resin from a pen tip and can perform 3D printing by hand drawing "3DoodlerAlthough it was a revolutionary idea, although the editorial staff actually reviewed it, the usability was a tolerance, but new fineness was reduced by a quarter, the weight was halved and the resin extraction speed improved Version "3Doodler 2.0"Appeared in Kickstarter. In just 16 minutes from the start of the project it has exceeded the target capital contribution of 30,000 dollars (about 3.6 million yen).

3Doodler 2.0: The World's First 3D Printing Pen, Reinvented by Wobble Works LLC. - Kickstarter
https://www.kickstarter.com/projects/1351910088/3doodler-20-the-worlds-first-3d-printing-pen-reinv

"3Doodler 2.0" that improved the pre-model 3Doodler and became a slim design. As 3Doodler gave out resin slowly, the creation of three-dimensional objects required experience and tricks, but in 3Doodler 2.0 the resin is pushed out stagnant according to the speed of hand movement.


Just plug in a special resin stick from behind.


You can draw pictures and create solid objects with sticks coming out of the pen tip with heat.


Screen pictures on pure white notes.


When I thought it was, a three-dimensional dog was finished in a blink of an eye.


It is also possible to produce that popular character using dissolved resin instead of youkai.


Bicycles, airplanes, monuments, deer etc are made.


What a scissors made with 3Doodler 2.0 ......


It is really possible to cut paper with chokichoki.


With the improved 3Doodler 2.0, it makes it possible to create a variety of works as below.





As for how to improve specifically, the pen body becomes thinner and easy to hold, the weight is 50 g which is half of the weight. The material of the pen has changed from plastic to aluminum and it is more solid.


The nozzle and the drive system were redesigned pursuing more usability.


Besides raising the extraction speed of the resin, it adopts a two-step "variable speed method".


By double clicking on the button you can leave the resin running and it is also a convenient point that you do not have to hold down the button all the time.


Peripheral accessories have also been enhanced. Below is 2 hours for ABS resin, 3 hours for PLA resin 3D floor 2.0 can be used even in nonstop power supplyJet pack".


"Speed ​​variable resin extraction can be done with feet"Foot pedal"The six penpoints that make the work speed smooth and the tool for attachment became a set"Nozzle set"You can put a plastic stick upright with a pen"DoodleStand"The items that were not in the previous model are sliding.


The products that can be obtained by the investment amount are as follows.

· $ 50 (about 6000 yen):sold out
· $ 85 (about 10,000 yen):3Doodler 2.0 x 1 book, PLA plastic stick x 4 packs (100 in total), limited to 2000 people
· $ 99 (about 11,000 yen):Same as above, limited to 500 people
· $ 130 (approx. 15,000 yen):3Doodler 2.0 x 1 book, PLA plastic stick x 4 packs (total 100 pieces), DoodleStand x 1 machine, nozzle set x 1 piece, limited to 500 people
· $ 150 (approx. 17,000 yen):3Doodler 2.0 x 1 piece, PLA resin stick x 4 packs (total 100 pieces), jet pack x 1 piece, limited to 500 people
· $ 175 (about 20,000 yen):3Doodler 2.0 x 1 piece, PLA resin stick x 4 packs (total 100 pieces), DoodleStand x 1 piece, nozzle set x 1 piece, jet pack x 1 piece, limited to 500 people
· $ 195 (approx. 23,000 yen):3Doodler 2.0 x 1 piece, PLA resin stick x 4 packs (total 100 pieces), DoodleStand x 1 piece, nozzle set x 1 piece, jet pack x 1 piece, foot pedal x 1 piece, limited to 500 people
· 198 dollars (about 23,000 yen):3Doodler 2.0 × 2, PLA plastic stick × 8 packs (total 200), limited to 200 people
· $ 260 (about 30,000 yen):3Doodler 2.0 × 2, PLA resin stick × 8 packs (total 200), DoodleStand × 2, nozzle set × 2, limited to 200 people
· $ 275 (about 32,000 yen):Gold color special edition 3Doodler 2.0 x 1 book, PLA plastic stick x 4 packs (100 total), DoodleStand x 1, nozzle set x 1, jet pack x 1, foot pedal x 1, 500 people limited
· $ 300 (about 35,000 yen):3Doodler 2.0 x 2, PLA plastic stick x 8 packs (total of 200), jet pack x 2, limited to 300 people
· $ 350 (about 41,000 yen):3Doodler 2.0 x 2, PLA plastic stick x 8 packs (total 200), DoodleStand x 2, nozzle set x 2, jet pack x 2, limited to 200 people
· $ 390 (approx. 46,000 yen):3Doodler 2.0 x 2, PLA plastic stick x 8 packs (total 200), DoodleStand x 2, nozzle set x 2, jet pack x 2, foot pedal x 2, limited to 200 people
· 500 dollars (about 60,000 yen):3Doodler 2.0 x 4, PLA plastic stick x 16 packs (400 total), DoodleStand x 2, nozzle set x 1, jet pack x 1, foot pedal x 1, limited to 200 people


· Education Bundle 1000 dollars (about 120,000 yen):(For students) 3Doodler 2.0 × 12, PLA resin stick × 1200, DoodleStand × 12, nozzle set × 4, jet pack × 1, foot pedal × 3 + (For teachers) 3Doodler 2.0 x 1 piece, PLA resin stick x 4 packs (total 100 pieces), DoodleStand x 1 piece, nozzle set x 1 piece, jet pack x 1 piece, foot pedal x 1 piece, limited to 200 people


In addition, the shipment of products is scheduled around May 2015, shipping outside the United States is also possible, but the cost is unknown. The deadline of investment is 22:56 on January 25 (Sunday) 2015 in Japan time.