"GTool PanelPress" to straighten and straighten the bent iPhone 6 Plus straight back
The iPhone 6 Plus features a large 5.5 inch display and a slim width of 7.1 mm,I got bent when I put it in my pocket, The case has occurred. Apple said "Extremely rare caseAlthough it is said that there is no problem at the practical level, even if iPhone 6 Plus got crooked, a professional tool that can be restored straight and flat is the gTool's "PanelPress"is.
PanelPress for iPhone 5, 5S, 6 & 6 Plus | gTool
http://www.gtool.com/47/panelpress%20for%20iphone%205%2c5s%2c%206%20%26%206%20plus.aspx
In "PanelPress" you can see how to restore the iPhone 6 Plus straight and flat and the results from the following movie.
GTool PanelPress for iPhone - YouTube
The iPhone 6 Plus crooked and bent.
When repairing, remove the display and insert the SIM card tray. Various modules have been removed.
It is installed in PanelPress with its back side up.
Since there is a movable fulcrum bend made of rubber on the bottom side of PanelPress, move it according to the bent part.
Next turn the knob on the right side counterclockwise to fix the right end of the iPhone 6 Plus firmly.
Let's adjust so that the top and bottom become parallel if rubber is misaligned.
Once the right end is fixed, adjust the post bend again.
Finally, turn the knob on the left end to repair the distortion.
While visually checking the curvature of the device, gradually tighten the knob.
After tightening the left end of the device tilt below the middle strut bend, leave a while in that state.
Loosen the knob lastly to take out the device and the repair work is completed.
As you see from the side this way, it is flat as new.
If you put it on a horizontal desk, you can see well that the distortion is corrected properly.
PanelPress supports repair of iPhone 5 / 5S / 6 as well as iPhone 6 Plus.
PanelPress is a tool for professionals, but it is possible to purchase from a dealer. Prices vary depending on the dealer, but in the USETech PartsI sell it for 299.99 dollars (about 32,000 yen).
Related Posts: