Lightweight ultra-thin wallet made of carbon fiber "Common Fibers"
For the first time in the world3D printer that can output carbon fiberHas appeared, but in general it is a bottleneck that manufacturing costs become higher. Meanwhile, under the mission of "casual carbon fiber", a lightweight, ultra-thin wallet made at low cost by combining with a composite material "Common Fibers"is.
Common Fibers - A Real Carbon Fiber Wallet by Gabriel Mountjoy - Kickstarter
https://www.kickstarter.com/projects/1601821201/common-fibers-a-real-carbon-fiber-wallet
You can see what kind of wallet "Common Fibers" made of carbon fiber can be seen from the following movie.
Weave lightweight and durable carbon fiber ... ...
Common Fibers "made ultra-thin by collapsing by special hinge technology.
Wallet made of carbon fiber, card slot × 3 · inside pocket × 1 · diamondRipstopWas givenSlim Wallet"When……
Card slot × 6 · Inner pocket × 2 · Diamond ripstop was given "Max Wallet"there is.
Common Fibers metal logo on the front side.
The following is a wallet case for iPhone 5c / 5s with card slot × 3 · internal pocket × 1.
Opening and closing is possible as the material "Micro Suction Closure" adsorbing to the screen is attached inside.
The hinge part which folds the carbon fiber is "CF-Lex"The patented technology of being used is used.
Color variations of carbon fiber are under development.
You can see the movie that is verifying how thin it is with Common Fibers putting cards and cash from the following.
Using your Max Wallet - YouTube
There are dollar cards, business cards, cards in front of Max Wallet.
First of all store the bill in Max Wallet.
Next, I will put all the business cards in the inner pocket.
The other inside pocket stores gift cards.
I will put credit cards etc one by one into 6 card slots.
You can see that it is very thin if you tilt it all while it is stored.
If you invest 35 dollars (about 3,500 yen) in the project of Kickstarter, you can get 2.5 inches (6.35 cm) x 4 inches (10.16 cm) 'Slim Wallet' with a capital of $ 45 (about 4,600 yen) "RFIDSlim wallet with block function "is available.
You can get "Max Wallet" of 3.25 inches (8.25 cm) × 4.25 inches (10.7 cm) with a capital of 50 dollars (about 5100 yen), "Max Wallet with RFID block function" with a capital of 60 dollars (about 6100 yen) You can get. By the way, the dimensions of Japanese bank notes1000 yen billIs 7.6 cm × 16.4 cm,10,000 yen noteIs 8.4 cm × 17.4 cm, there is a height higher than American banknotes, so if you use it in Japan there is a possibility that a 10,000 yen bill will run off even with Max Wallet.
To get "iPhone 5s / 5c Wallet" you need to capture $ 75 (about 7650 yen) and get a "$ 85 (about 8600 yen) investment to get" iPhone 5s / 5c Wallet with RFID blocking function " .
Also, as of the writing of articles, we have collected over $ 47,243 (about 4.82 million yen) over the target amount and it is definitely commercialized. In addition, since the stretch goal of 40,000 dollars (about 4 million yen) is breaking through, options for selecting red interior and weave pattern are added.
Shipping is scheduled for July 2014, and shipping outside the United States requires a separate $ 15 (about 1500 yen). The deadline of investment is Japan time by 15:59 on Friday, April 18, 2014.
Common Fibers - A Real Carbon Fiber Wallet by Gabriel Mountjoy - Kickstarter
https://www.kickstarter.com/projects/1601821201/common-fibers-a-real-carbon-fiber-wallet
Related Posts: