Small processing machine "DIWire" capable of flexibly bending ultra-rugged wire to create small items and outdoor products

Many wire-forming machines that process wire rods are large-sized, but despite their small and stylish appearance, they can bend ultra-rugged wires freely and process them in any shape, connect them with a PC via USB You can output "DIWire"is.

DIWire: The First Desktop Wire Bender by Pensa Labs - Kickstarter
http://www.kickstarter.com/projects/1638882643/diwire-the-first-desktop-wire-bender

You can see what kind of things can be made from the following movie by bending the wire with the wire forming machine "DIWire".


The following picture shows DIWire viewed from above. Wire is plugged in from the right side.


A thick wire bent with the motor sound.


As you look up, the fixed wire will be processed with the leftmost bend head.


It is possible to create a wall-mounted clock with a simple design simply by folding it on a flat surface.


You can also create stereoscopic workpiece by joining together.


It is a small size that can be placed on a desk if it is lined up with a notebook PC. I am moving the DIWire by entering the angle to process the wire using special software on the PC.


Place the wire processed into a simple bridge shape on two pieces of wood ......


It is sturdy enough that people will be able to put the whole weight on.


DIY makes it easy to create camera sliders.


Because it creates based on the numerical value entered on the PC, you can create many same parts.


Calculate the size of the bottle and make handles with wire to complete the DIY cup.


You can create up to the day you can read in outdoor.


Dog stand of a dog that can be used with balls


Even if vinyl is pasted on the framework to make a DIY yacht, it will not sink and it will be lightweight.


DIWire is a stylish design with a hole in the exterior case, it can be fixed by adjusting the width of the mouth of the auto by the diameter of the wire, and the bending head which performs the bending can be exchanged for one with 16 to 18 inches. Since the workbench of the same size as the main body is also installed, you can do all the work on the desk.


DIWire body dimensions are 9 inch (about 22.86 cm) in length, 15 inch in width (about 38.1 cm), 7.5 in (19.05 cm) in height, and special software is compatible with SVG format.


DIWire "1. Draw a curve with special software" "2. Connect the PC and DIWire with USB" 3. "Set the wire in the DIWire" "4. Bend processing" 5. "Combine" to create objects To do.


When creating a three-dimensional object, use the following clip.


What you can create depends on your idea.


You can also produce furniture such as lamp shade and table legs.


DIWire main body + special software + 2 bend heads (16 · 18 inches) with a capital of 3,200 dollars (about 329,000 yen), you can get kit of 1 calibration plate. When investing from non-US, Canada, EU countries and Australia,PENSA LABSIt is necessary to contact directly from shipping and shipping fee.


The deadline for investment is until 23:10 on December 17, 2013 (Tuesday) in Japan time.