``Anker 737 MagGo Charger'' review that can charge three iPhones, Apple Watch, and AirPods at the same time



' Anker 737 MagGo Charger ' can wirelessly charge three Apple products, iPhone, Apple Watch, and AirPods, at the same time. Wireless charging is convenient, but if you use a compatible genuine wireless charger, you have to prepare a different charger for each, or press the outlet of the outlet, but Anker 737 MagGo I tried using Charger at once because I can solve these problems clearly by using Charger.

Anker 737 MagGo Charger (3-in-1 Station) | Product information for magnetic wireless charger

https://www.ankerjapan.com/collections/wirelesscharger/products/b2599

The box containing the Anker 737 MagGo Charger looks like this. It contains the letters 'SERIES 7' instead of the product name.



At the bottom right of the front of the box are the 'Made for Apple Watch' and 'Made for MagSafe' logos, which indicate that they are Apple-certified third-party accessories.



The contents of the box look like this. Anker 737 MagGo Charger main body,

USB Power Delivery compatible USB quick charger (30 W), USB-C to USB-C cable (1.5 m), instruction manual, warranty card included.



This is the Anker 737 MagGo Charger body. On the front is a circular area for wireless charging iPhone 12 and newer with MagSafe. If you place your iPhone here, the MagSafe compatible device will stick to it with a magnet, so you don't have to worry about your iPhone slipping off.



The back side looks like this.



There is a USB-C port at the bottom.



When viewed from the left side, there is a triangular cavity in the middle. Wireless charging is possible by placing a

Qi charging compatible device here.



On the right side there is a pedestal for charging Apple Watch. It looks like the official Apple Watch wireless charger is embedded as it is.



Looking from above it looks like this.



When Apple Watch is not placed, the charging base for Apple Watch extending from the stand is quite worrisome, but if you put iPhone or Apple Watch, you will not be bothered at all.



The output of the included USB quick charger is 30W.



Insert the USB-C to USB-C cable into the USB rapid charger.



The other side connects to the USB-C port on the bottom of the main unit.



After that, if you plug the charger into an outlet, you will be able to charge the iPhone and Apple Watch at the same time.



Of course, wireless charging is possible even with

a MagSafe compatible case attached.



In the case of

the MagSafe charger , which is a genuine Apple MagSafe compatible wireless charger, it is recommended to use a power adapter with an output of 20W for the power adapter. Apple Watch also requires a power adapter with an output of 18W or higher when charging with the Apple USB-C Magnetic Fast Charging Cable .



If you use these wireless chargers, you will have to use two 20W output power adapters at the same time, so the area around the outlet will be quite compressed like this.



However, with the Anker 737 MagGo Charger, the outlet area is clean.



Apple's 20W output power adapter has a wide width, so if you try to insert it into a side-by-side outlet like the one below, there are many cases where you can't insert it due to its size. However, with the Anker 737 MagGo Charger, you can charge up to 3 devices at the same time with a single outlet, so you can easily save space around the outlet.



The space with the third charging area is a triangle with a base of about 7 cm x height of about 7 cm.




Therefore, it seems difficult to charge anything other than compact wireless charging compatible devices like AirPods here.



I actually used the MagGo Charger to wirelessly charge the iPhone 12 with an empty battery and the 2nd generation Apple Watch SE with a remaining battery of 24%.



In 30 minutes from the start of charging, the iPhone 12 was able to charge the battery to 25% and the 2nd generation Apple Watch SE to 54%.



As charging continues, the iPhone 12 battery recovers to 49% and the 2nd generation Apple Watch SE battery recovers to 91% one hour after the start of charging.



The included charger has an output of 30W, so if you charge the three iPhones, Apple Watch, and AirPods at the same time, it may take longer to charge the battery than if you charge each of them individually with genuine accessories. However, since one device can wirelessly charge up to three devices, it does not put pressure on the outlet and requires only one cable, so you can overwhelmingly organize your desk.

In addition, Anker 737 MagGo Charger is on sale at Amazon.co.jp for 19,990 yen including tax.

Amazon.co.jp: Anker 737 MagGo Charger (3-in-1 Station) (Magnetic 3-in-1 Wireless Charging Station) (USB-C Rapid Charger Included) [Wireless Output (15W) / PSE Technical Standards Compliant ] Wireless charger with Apple Watch holder Qi certification Made for MagSafe certification iPhone 14 Apple Watch Various correspondence: home appliances & cameras



You can also get it by answering the following GIGAZINE questionnaire.

GIGAZINE Summer gift large release project ``Please answer the questionnaire and bring them all!''-GIGAZINE



in Review,   Mobile,   Hardware, Posted by logu_ii