I tried using Anker's portable charger "PowerCore jump starter mini" that allows car jump start

On Thursday, April 12, 2018, you can jump start a car to Anker's portable charger lineup "Anker PowerCore jump starter mini"Has been added. Anker PowerCore jump starter mini is a traditionalAnker compact jump starter(Battery capacity: 10000 mAh), and the battery capacity is 9000 mAh, which is a little smaller, but as with conventional products, it is possible to jump start 15 times. I tried using the real thing that I got to the editorial department as to what kind of feeling it is actually usable.

Anker | PowerCore Jump Starter mini
https://www.anker.com/products/variant/PowerCore-Jump-Starter-mini/A1502111

You can check the appearance of the jump start using the Anker PowerCore jump starter mini to the car whose battery actually went up in the following movie.

PowerCore jump starter mini tried car jump start - YouTube


The package of "Anker PowerCore jump starter mini" is based on white and light blue.


When I opened the box, there was a carry case designed with light blue and black. Because the carry case itself has a heavy feeling, it seems that a set of charger bodies etc. are stored inside.


I will compare the carry case and the iPhone X. The carry case is 22 cm × 13 cm, the length of the long side is about 1.5 times longer than the long side (14.4 cm) of iPhone X, the horizontal length is 13 cm and it is somewhat shorter than the long side of iPhone X.


The height is about 2/3 of the length of iPhone X and about 9 cm.


The weight was 982 g by actual measurement.


I will try opening the case immediately.


In addition to the main body, there were jumpers with clamp, AC adapter for main body charging, car charger for main body charging, Micro-USB cable, instruction manual, support contact point in addition to the main body in the case.


The main body is 15.5 cm × 8.5 cm and is about the same size as iPhone X.


The thickness is 3 cm, it is about 4 times the iPhone X thickness (7.8 mm).


The weight of the main body is actually measured 366 g.


The main unit has a power button and an indicator to display the remaining battery charge ......


There is an LED light on the other side.


When the power button is pressed and released immediately, the remaining battery power is displayed on the indicator. At the pushing time there was about 75% of the remaining amount.


And when you press and hold the power button ......


The LED light on the back side will light up, and it seems to be useful at the time of working in the dark.


To charge the mobile battery, plug the AC adapter into the outlet ......


Charging is possible by connecting the connector to the DC input port of the main unit.


You can check the remaining battery level with an indicator while charging.


Also, if you use the enclosed car charger, you can charge it from car cigarette socket.


Next, try charging the iPhone X with the battery empty fully. First insert the USB terminal of the Lightning cable into the USB port of the main unit ......


Connect the Lightning terminal to iPhone X.


Then, when you press the power button on the main unit, charging begins. It took 2 hours and 32 minutes to charge up to 100% state.


next"USB simple voltage / current checkerLet's also look at the actual current and voltage at charging. In this time, I will examine using Nexus 6 of Android terminal and the battery of the iPhone X which was slightly reduced.


When charging the Nexus 6, the current is 1.39 A.


The voltage was 5.07 V, and there was output of approximately 7 W.


The current when charging the iPhone X is 0.9 A.


The result is that the voltage is 5.05 V and the output is about 5 W, which is somewhat lower than Nexus 6.


Also, since there are two USB terminals on the main unit, simultaneously charge two Nexus 6 and iPhone X, and examine the output change.


Nexus 6 has a current of 1.40 A.


The voltage was 5.06 V, the output was about 7 W, which was almost the same as the output.


Next, the current of iPhone X is 0.99 A ... ...


The voltage is 5.12V. The output was about 5 W, and the iPhone X did not change either. It seems that output does not decrease even if two cars are charged at the same time.


Next, I will raise the car battery of the editorial department and I will actually start a jump start. Please note that Anker PowerCore jump starter mini is dedicated to 12V cars and does not correspond to 24V cars such as large trucks. The appearance of actually going to the jump start can be confirmed in the following movie as same as the beginning.

PowerCore jump starter mini tried car jump start - YouTube


When doing a jump start, first connect the red and black clamps to the car's battery.


After connecting the connector of the jumper cable to the Anker PowerCore jump starter mini ......


When I started the engine again, the car engine started and I was able to succeed in the jump start.


Anker PowerCore jump starter mini is 7999 yen including tax with Amazon, but only for 100 pieces on April 12, 2018, it is 6999 yen including tax.

Amazon | Anker Compact Jump Starter 【Maximum Current 400 A / IPX 5 Waterproof Standard / LED Flashlight / Mobile Battery Function Installed / with Carry Case】 | Engine Starter | Car & Motorcycle