A wooden model "UGEARS" of horse and windmill with plenty of retro style that moves with the same structure as the real thing

Miniature models of cars and trains are actually moving, but internal mechanisms are often different from real ones. Wooden miniature model "UGEARS"Has almost the same structure as the real thing, it moves only with the power of rubber without using a motor or electric power.

Unique Wooden Mechanical Models «UGears Models»
https://ugearsmodels.com/

You can see what kind of model "UGEARS" is modeling by looking at the following movie.

Ugears: Mechanical Evolution Highlights. Kickstarter Campaign 2018 - YouTube


Horses were once an important means of transport for the nomadic people.


The horse-shaped model of "UGEARS" is made with a structure that faithfully reproduces real muscles and joints ... ...


Just like a real horse walking, I walk on four legs.


Every part imitates a real horse, but the power is only the action of gravity, the gear interlocking with rubber and rubber.


A weapon that strikes a large bow that was used from ancient times through the Middle Ages,VaristorAnd models of the tower are included in the "UGEARS" lineup.


The model of "UGEARS" says that each individual part is faithful to the real thing, so that he feels as if he / she became an architect or a technician.


From the model of the horse-drawn carriage, there is a wild western play atmosphere.


Removing the stopper behind ... ...


The carriage actually started running.


England's traditional tower type windmill is stately stately figure.


Internal complicated mechanism is firmly reproduced. The surroundings are only frameworks and it is possible to take a closer look at the movements in motion.


The chain that transmits power is also all made of wooden parts.


"UGEARS" has a model of a steam locomotive ... ...


You can run on the track.


It seems to be enjoyable when you look at details, such as piston mechanism and wheel rotation.


A retro-style roadster (open car) is built neatly into the groove of the tire.


When I put the gear in the drive ......


Rubber powered miniature V8 engine started to move.


Of course the roadster runs.


There are models of airplanes how. It is not a truly truly sky flying but it is a mechanism that can connect the tower that can rotate the top and move the plane.


However, in addition to simply turning in conjunction with the bars, the propeller also rotates firmly.


In the tower connected to the airplane, you can control the speed and the inclination of rotation.


I am excited just by looking at a motorbike model, and I want to run somewhere.


When winding rubber which becomes power ... ....


The bike started running swiftly.


The model of "UGEARS" has been created by engineers to carefully study the structure of the target and pay close attention to the balance of weight.


The model will reach the hand in the state that the part is fitted in the wooden frame, so you can remove it from the wooden frame yourself and enjoy the pleasure of assembling from scratch.


It is a blissful moment to finish a complex model and see the model moving.


Just looking at the way that works of gear movement and parts, also feel that spend time forever.


"UGEARS" project is now looking for investment with Kickstarter of Cloud Funding Platform. As much as $ 15,000 (about 1.6 million yen) was mentioned as a target amount, more than $ 94,000 (about 10 million yen) has already gathered at the time of article creation. In the "UGEARS" project, a horse model can be obtained with a contribution of 39 dollars (about 4100 yen), while a contribution of 54 dollars (approx. 5700 yen) makes a model of a tower windmill model, an airplane model, a railroad car model, a truck model If one is available from Japan, if these are shipped to Japan, a separate shipping fee of $ 28 (about 3000 yen) is required. Also, in addition to the model above, you can get a set with a horse-drawn carriage, a roadster, a motorbike etc. added by 385 dollars (about 41 thousand yen), and this time the shipping cost is 108 dollars (about 12,000 yen) It is. Shipping is scheduled around July 2018.

The deadline for investing in "UGEARS" is Japan time on May 2, 2018 (Wednesday) at 13:00.

UGEARS: mechanical evolution highlights by UGEARS - Kickstarter
https://www.kickstarter.com/projects/978262034/ugears-mechanical-evolution-highlights