I tried to wear a Donkey's leather shoes "slide sole change" that realized "you can exchange if the heels of the leather shoes are reduced"

One of the biggest troubles for people walking around in a suit shape like the outside salesman is the problem that the heel of the leather shoes wears out. "These shoes can still be loaded but I can not use it anymore because the heel is useless ...... I wish I could just renew the heel ... ..." leather shoes realized what everyone thought "Slide sole change(SSC) "was released in Don Quijote, so I decided to wear what kind of shoes.

SSC slide sole change business shoes
https://www.share-front.com/ssc-slide-sole-chanege-system

I tried wearing SSC and it looked like this. Although it can not be distinguished from a very general business shoe in appearance, in fact the part of the heel ......


I am getting out of puckery. The heel has become a separate part, it is OK if you replace it with a new one when wearing out.


SSC I bought for that. The box is an ordinary type, but ...


For goods, one set of heels for replacement plus shoes is included. In addition, it is unnecessary to replace the heel with a tool, and it is easy to remove it with just pushing the button.


Contents is like this. I chose "Straight Chip Brown" this time from among six types in total. In addition to the shoe main body, there are two spare heels for one foot.


All six types are like this. From the left upper row "Vamp" "Straight Chip" "Straight Chip Brown", from the bottom left "Soir Mocha" "Bit" "Monk Strap" has become. The price is common for each type and it is 5900 yen excluding tax and 6 sizes of 25.0 / 25.5 / 26.0 / 26.5 / 27.0 / 27.5 are prepared. Although this time only for business shoes for men, we are also considering development of high heels for women.


The exterior is exactly the same as ordinary leather shoes. By the way, the material of the upper seems to be a synthetic leather.


The appearance that the heel part also changed in particular is not pear. Slightly "If there is a gap between the sole and the heel ...?", It is unlikely that the possibility of being aware of that will be noticed if 50 cm is left.


Such a button is attached to the portion which is not visible to the heel ... ...


Hold the button and slide it off the heel. The fact that the button is attached to a slightly dented place reduces the situation that the heel goes off unexpectedly when stepping on something.


The skeleton of the heel is made of ABS resin and molded into a hollow shape. A small pin popped out on the left side of the ... ...


By fitting in this small hole in the back of the shoe, it locks so that the heel does not come off.


Synthetic rubber of about 3 mm in thickness is affixed to the part of the heel contacting the ground.


The part where the shoe and the heel are engaged is in the shape of the rail in the shape of the inverted H, so that it does not come off even if the force in the pulling direction is applied.


Two pieces of spare heel. As it is symmetrical design, it can be mounted on either side, it is also possible to equalize the reduction by swapping the left and right heels.


At the bottom of the shoe is "SLIDE SOLE CHANGE" letters and logos.


Even if you actually wear it, it rarely felt a sense of incompatibility. Is the feeling at the time of grounding a bit hard? Although it sometimes felt, it is a level that it seems to be solved to some extent by accustoming.


Regarding durability, the manufacturer conducts the same test as the inspection method of the heel attachment strength in common shoes at the "Boken Quality Assurance Organization Commercial Equipment Test Center", which is a general foundation, and " We have passed the Boken standard which is a measure of judgment. " In addition, it has exceeded the criteria even at a mounting strength of 290 N or more, which is said to be higher than the Boken standard, and it is confirmed that there is no structural problem even when conducting impact durability tests on 100,000 times on one side It is said that it is done. Everybody who has done product development and quality control has heard of Bokken's name, so it is good to think that there is no problem with reliability.

However, when arriving at the rare occasion, "hard" sounds were sometimes felt slightly as "Kachin". It sounded almost like a tap dance shoe, but this is a level at which anxious people are concerned, and it seems to be said that it is a level not noticed at first if it was walking in the town very normally.


Even for synthetic leather materials, I feel a little hardness, especially during wearing out. However, this should also be familiar with the legs as they become accustomed, so there should be no problem in particular. Although it is anxious about the durability when continuing the actual life, it seems that certain reliability is secured at the time of clearing the standard of the product inspection organization.