I tried various processing with CO2 laser processing machine "Smart Laser CO 2" which realized output at business level with super-discount price

CO2 laser processing machine of the assembly type which realized super-discount price despite business level 40 W high output "Smart Laser CO 2You can use various ideas depending on the idea. Using Smart Laser CO 2 built last time, I tried various kinds of decorating smartphone cases, making cases of small computer Raspberry Pi, baking brown bread, etc., and the power of the world's largest assembled CO 2 laser processing machine I realized it.

World's largest assembled CO 2 laser processing machine (cutter) Smart Laser CO 2
http://www.smartdiys.com/smart-laser-co2/

The way to build up the CO 2 laser processing machine "Smart Laser CO 2" can be confirmed in the following article.

I tried to use "Smart Laser CO 2" which realized the home laser cutter for professional level output & 1/10 price - GIGAZINE


First of all, I will paint on a wooden smartphone case with laser processing on the back.


Unlike acrylic boards, if laser processing is applied to wood, there may be cases where fire may occur,Extinguishing kit for Smart Laser CO 2"Is used.


By connecting the kit with a tube, air can be sent to the laser processed part to enable stable processing.


First, sketch on wooden board.


I will apply a gradation.


Put the smartphone cover on the draft and fix it with the masking tape and start work.


While confirming how much gradation is applied, when applying laser processing three times, ...


Like this. The thick part is carved to a greater depth, and the unique texture of the tree is utilized.


I got only one original smartphone case in the world.


Continue drawing and painting parts of some parts on a wooden board.


The material to be processed is 3 mm thick acrylic board.


You can check how to process acrylic in the following movie.

(20 × speed) Cut the acrylic board with domestic CO 2 laser processing machine "Smart Laser CO 2" with price of 1/10 in business level output - YouTube


Processing end.


The clipped part is missing. Although it is possible to cut out 3 mm acrylic board with one shot, if you want to cleanly cut the cut surface reliably, it is better to increase the speed and draw the same path several times.


Cut out parts look like this. Even fine parts could be cut out exquisitely.


I was making parts of a case for a small computer "Raspberry Pi".


I will use acrylic parts on Raspberry Pi B + with bolts.


Looking from above it looks like this.


Acrylic boards are piled up while avoiding chips, condensers, heat sink etc.


Finally tighten the nut and fix the top cover to complete the original Raspberry Pi case.


I thought about cooling on the top cover and cut out the letter "G" which is the icon of GIGAZINE.


The back and sides look like this. The cut section of acrylic is also very smooth, and the rigid feeling is outstanding.


Micro-USB and HDMI terminals can also be used. When using a 3D printer, warpage occurs due to changes in the surrounding environment such as temperature and humidity, so it is extremely difficult to pump the laminated case with such precision, but the accuracy of laser cutter + acrylic work is high, self praising It was a level finish.


Depending on the idea it can be processed into various things. For example, when processing a hand-made aluminum mirror sold at a 100 yen shop with a laser, it looks like this.


When cutting alumite processing, a silver aluminum base comes out and it becomes a pattern. In addition, because the reflectance of the metal was high, the aluminum itself was not scraped off.


It is also possible to process food. To bread ......


You can paint with charred brown.


I saw sharp browning on the laser processed part.


The portion with scorch tastes quite bitter when eating. It is recommended to eat it on curry etc.


MDFIt is also possible to process.


You can get through by repeatedly applying a laser.


Cut out parts can be easily folded. This is also the case for Raspberry Pi.


Completed incorporating the back side.


The Smart Laser CO2It is also possible to operate with Raspberry Pi. It is overwhelmingly convenient because it is less bulky than a notebook PC.


The CO2 laser processing machine which can easily cut or brown can be said to be an item of drooling for "Maker" who makes anything by herself.


The world's largest assembled CO 2 laser processing machine "Smart Laser CO 2" is on sale at the official online shop "smartDIYs Shop" with 248,800 yen (excluding tax). At the time of article creation, it is reservation reception for shipment shipped in late March.

[Late March shipping reservation reception] Smart Laser CO2 | smartDIYs Shop
http://shop.smartdiys.com/products/detail.php?product_id=752


· Continued
Cheap common breaking breaking cheap · I asked the developer how the self-made laser processing machine "Smart Laser" was born in the southern Alps of Yamanashi - GIGAZINE