Fly drone ignoring gravity at ultra high speed can make it yourself and make way and parts available from the net

The evolution of the drones that can be easily skipped by anyone with high stability is progressing, and its variations are also DJI 's DJI for aerial photographyPhantom 3"And very compact Parrot"Bebop Drone"It can be said that a wide variety of models are ranked on the ground. Under such circumstances, the following movies containing the appearance of a drone flying around with great momentum were talked about, but this aircraft was supposed to be self-made anyone with knowledge.

Minicp 120 x 2208 2000 kv 6 x 4.5 hqprop kiss esc 18 a nanowii 4 s 1800 40 c - YouTube


At the bottom of the screen is a drone, first the pilot takes off from the handheld state.


Rotor rotates, drones that "fly" and fly with a loud noise. From that movement, the appearance of the light body of the aircraft obviously is transmitted. I think that I hovered on the spot for a while ... ...


A drone that leaves the sound "Pua-wan!" And flies to the sky far away! A brilliant flight continues for a while from here.


It makes a shaky sound and flies away in front of you in the blink of an eye ......


If so, at the next moment, it soared to the sky far. It is exactly as big as bean grain. While the performance of the aircraft is leaving, there is also a spectacular skill of the pilot who is skipping kore.


Fly pass further in front of you at high speed. If you look carefully, you can see that the aircraft is facing right by 90 degrees.


I finished about 2 minutes of flight and landed again in the hands of the pilot. It has a translucent flight performance, but it also seems to be equipped with very delicate control that can be hand caught.


Although it is a mysterious drone that showed a surprising flight like this, I know that it should be said as expected, this is a self-made machine pursuing flight performance to the utmost limit.

Quadmovr drone is so fast it makes other drones look like they are standing still | News | Geek.com


The name of the aircraft is also displayed on the screen "Quadmovr"(Quad Mover), I created a man with a handle name Warthox. According to Mr. Warthox, the cost of the creation is only about 673 dollars (about 80,000 yen) if it is the main body, and that there is a need for accessories such as a battery charger etc in this.

Although it is a system of an aircraft control which is worrisome, this includes a self-made microcomputer "ArduinoBased on "FlyduinoWhat is called what is called. Of course, although it is Quadmovr showing very high stability also with Mr. Warthox's skill, the system called "MultiWii" is used for aircraft control, so that stable flight can be realized thanks to this It is getting. This is a gyro sensor and acceleration sensor that measures the motion and angle of the aircraftNintendo WiiIt seems to be diverting what is used for "Wii remote control" as it is, I pulled out the sensor unit from the controller and joined it to the board of Arduino as it was. This area is explained in detail on the following page.

Multicopter: What is MultiWii? | Pick World (PIC World)


MultiWii


In overseas where self-made drones are particularly active, there is a forum to explain various technologies including MultiWii, and environments that can learn detailed contents like the following page are in place.

MultiWii additional HOWTO overview - RC Groups


On the site of Flyduino, many parts of my own drawn are sold, and the parts of QuaDmovr are all collected here. It seems that it corresponds also to dispatch to Japan.

Warthox Frames


The title of the YouTube movie at the beginning was a mysterious thing called "minicp 120 x 2208 2000 kv 6 x 4.5 hqprop kiss esc 18 a nanowii 4 s 1800 40 c", but in reality it is supposed that kore is a listing of parts breakdown about. The aircraft frame is "MiniCP 120", the motor is "X 2208 kv", the propeller is "6 x 4.5 HQProp", the heart part is "KISS ESC 18 A", the flight controller is "Nano Wii", and the battery is "4 S 1800 40 C" , It seems that both are available on the Internet.

You can see how to combine the parts gathered like this by watching the following movie. It is not QuaDmovr at the beginning that is created here, but still it is a hard to understand how to organize your own drones.

Multicopter build | warthox frame on Vimeo


When actually dragging the drones assembled in this way, it seems that it is necessary to adjust the system using PC etc this time. It seems that each personality of the aircraft will appear even around here. By the way, when it comes to QuaDmovr level aircraft, the time it takes to fly with the installed battery is shortAbout 2 minutes... apparently ...

On Mr. Warthox's YouTube channel, it is possible to see many other aircraft flying like this.

Quadmovr - YouTube