How to easily cut the straps without scissors & how to make 'Beer bottle glass' with just a strap

For relocation etc, we often bind books and luggage with straps, but when you think about to unpack, you should have a clause that everyone once thinks of "There is no idea where the scissors are ...". I attempted to collect three DIY movies, such as how to easily cut straps even in emergency situations where there are no tools to cut such straps, and how to change favorite beer bottles to stylish original glasses with straps.

How to Cut Rope in an Emergency - YouTube


Smaller straps have appeared.


It is difficult to cut off with arm strength alone unless it is Arnold Schwarzenegger.


To cut this strap without scissors, first paint a mark with a marker at the position you want to cut.


Next fix it with both feet so that the marked position is in the middle.


Cross the stumps of the surplus part with the signs, scrub both hands with the straps upside down and scrub with gossy rosy.


Then it succeeded in cutting the straps in just tens of seconds due to frictional heat.


If you try with a thicker rope ... ...


I could cut it without problems as well. "Surely it's cool, is not it?"


However, one of the straps came apart as a result.


This can be used as it is if you fix it by hand.


In addition, it is okay to use thinner straps than the string you want to cut.


Rubbing all alone ......


Successful cutting. If you remember this method, even if you do not have scissors at a place to go, you can survive with only a strap.


Where you learn how to cut the strings, you can see how to make original glasses from beer bottles using straps from the following movies.

How to make drinking glasses, from any beer bottle! FULL HD - YouTube


What to prepare is an empty beer bottle, oil, narrow stick of wanting to make ice water, sandpaper, and glass.


First of all, wind the strings according to the position you want to cut.


When it is positioned, it is the point that tie the strap firmly.


If you tie it so that it does not unravel, firmly immerse the ringed strings in oil.


If you return to the previous position, it is ready.


Ignition of a strap with a lighter.


When it comes with a fire, turn it as if it were evenly heated so that heat could come in. It is said that the bottle will get hot, so be careful not to burn when practicing.


After heating for about 40 seconds, pour the ice water into the beer bottle.


Then I got ahead from where I was connecting "Potri" with a strap.


It was completed.


As it is like this, it is a super dangerous glass with rattling rattles, so it is completed if you apply sandpaper and make it smooth.


In addition, without using strings and flames, you can see the movie of how to make original glass of beer bottle using glass cutter from the following.

How to make Corona beer bottles into glasses every time! NO FIRE - YouTube


First, fix the beer bottle and cut the beer bottle precisely and in parallel.


It makes me feel like I made one lap.


Continue steaming hot water around the cut.


As soon as you finish hanging water to a certain extent, cool it with tap water.


One more hot water.


Again when water was applied, the bottle was cut alone.


The section is very beautiful as follows. A glass cutter is not what anyone has, but if you are at home you can make a better glass than using a stick and a flame.


Do not forget to put sandpaper at the end.