3D printer · 3D scanner · "FLUX" with one laser engraving function

With the introduction of 3D printers, the manner of production of things has changed drastically, and even at home it has become easy to create three-dimensional objects and others. However"FLUX"In addition to 3D printers, it also features a 3D scanner and laser engraving, making it a machine that can greatly expand the range of things made at home.

FLUX All-in-One 3D Printer - UNLIMITED. ELEGANT. SIMPLE. By FLUX Technology LLC - Kickstarter
https://www.kickstarter.com/projects/2117384013/flux-all-in-one-3d-printer-unlimited-elegant-simpl

This is FLUX. The size is 30.5 cm × 26.5 cm × 55 cm, the weight is 5.4 kg. It is compatible with Mac OS X, Windows, Linux, USB, SD card, Bluetooth 4.0 can be used, voltage is 100-240V.


It is a machine that can be easily assembled and reconstructed, and equipped with 3D printer, 3D scanner and laser engraving function with one unit.


You can see what you can do with FLUX from the following movie.


FLUX is an assembling hardware. Assembly is possible in about 20 minutes or so.


After completion it is like this.


You can do this from the application of the smartphone.


The output port is attached in the center so as to be supported by three struts.


I will put out filaments from here and make three-dimensional objects.


Each part is glued with a magnet, so the module can be easily disassembled, without tools.


I grab another part.


If you replace the part of the head, the thing that was a 3D printer changed to a laser engraving machine quickly. The output is 200 mW.


I can paint on the surface of the wood board.


If you use the iPad application, you can draw something crispy ... ...


Easily stamped.


You can make a stamp like this.


Switch on the pedestal is on.


Since FLUX has a built-in 3D scanner, it is possible to scan three-dimensional objects by pedaling the base just by turning on the switch.


Three-dimensional objects can be mass-produced on the spot if 3D printing function is used.


There is also a service to share photos and data of what you made.


With this feeling you can see the data of various solid objects.


If you use data you will be able to create unique accessories yourself.


Detailed specifications can be confirmed from the following.


FLUX is currently recruiting investment for commercialization with Kickstarter and already collects more than 750,000 dollars (about 87 million yen) at the target price of 100,000 dollars (about 12 million yen). With the investment of 599 dollars (about 70,000 yen), FLUX classic version with 500 g filament for 3D printing can be acquired, shipping corresponds to the whole world, shipping fee to Japan requires a separate 50 dollars (about 5800 yen) It has become.


The deadline is Monday, December 22, 2014.

FLUX ALL-IN-ONE 3D Printer | Print Your Reality
http://flux3dp.com