Espresso machine "La Fenice (La Fenice)" which creates coffee by energy saving & time reduction by world's first electromagnetic induction heating

Espresso machines capable of producing authentic coffee from many home electronics manufacturers are on sale, and many people enjoy handy tasty espresso and coffee, but depending on the machine hot water is warmed and extracted It also has to wait for a while until it becomes possible. In addition, although it sometimes consumes electricity to keep warm water warm, it is stated as "Espresso machine using the world's first electromagnetic induction heating (IH)"La Fenice(La Fenice) has become a machine that realizes energy saving and shortens waiting time by instantly boiling hot water by using a high-performance IH heater.

Home - La Fenice Milano
http://www.lafenicemilano.com/


What kind of product La Fenice is like is understood by seeing the following movie etc.


Stefano Poruti who developed La Fenice and Fabio Tapela. The traditional coffee machines often needed tanks to keep hot water and were dissatisfied with consuming extra energy to do so, he said he decided to develop La Fenice.


La Fenice is a coffee machine that can extract both espresso and American coffee with one unit.


At the center of the main unit is a tank to place water, from the left side facing the espresso with steam, from the right side is set up for extracting coffee with hot water. Various buttons for control are arranged at the top of the main unit, and the two brown parts visible on the front are the coffee pod handle attached to the filter.


When you look at the main body from the back, you can understand its characteristic structure well. A coiled device placed in a glass container is an IH boiler unique to La Fenice.


The same principle as the electromagnetic cooker (IH cooker) is used for the boiler part that warms water to make it hot water, as you can see from the explanation "The world's first coffee machine using electromagnetic induction heating (IH)" .


In a commercially available IH cooker, coils that generate electromagnetism are arranged just under the pan, but ...


La Fenice stretches its coil for a long time ......


It is arranged to wind a coil around an iron cylinder.


This is the structure of the IH boiler which is housed inside the La Fenice main body.


With this structure, quick extraction, high energy efficiency and even more precise temperature control became possible without having to prepare hot water in the tank.


In a typical espresso machine, it is a temperature sensor that is often attached to a hot water tank, but La Fenice seems to be able to control the temperature more accurately because the sensor is arranged just behind the boiler.


By corresponding to espresso, the boiler generates steam up to 11 atm.


Espresso extracted with high pressure and proper temperature control.


In the case of coffee of the usual type, it is extraction at 1 atm.


Of course it is also possible to extract coffee with hot water.


Not to mention grinding coffee beans, cup of ground beansK cupIt also supports cartridges like, so you can easily enjoy a variety of tastes.


The biggest feature is the boiler of the IH type. It is said that you can realize energy savings of up to 80% by making hot water as much as you need when needed.


Development was done to realize that mechanism.


The controller system for IH control is also developed exclusively.


Such La Fenice is looking for investment at Kickstarter of the cloud funding site. For the target amount of $ 70,000 (about 715,000 yen), about 200,000 dollars (about 20.5 million yen) is gathered at the time of article creation.

The Early Bird plan in order of arrival has reached its capacity, but if you invest $ 300 (about 30,000 yen), you can get one La Fenice. In the limited 120 set of 370 dollars (about 38,000 yen) plan, press milk whisk and coffee powderTamperIt is also possible to get it as a set.


A further 600 dollars (about 61,500 yen) plan includes a set of grinders for grinding beans, and if you invest 700 dollars (about 72,000 yen), you will be limited edition of limited 99 handmade made It is also possible to get it.


Copper and brass are used for the body part of the limited edition, and the decorative part at the top of the main body is the home of Venetian glassesMuranoHandmade glass work parts set, the coffee pod handle is made of chestnuts.



The deadline of investment is Japan time at 11:59 (Wednesday) 20:59 and the shipping time is December. To ship outside the United States, shipping fees of 15 dollars to 150 dollars (about 1500 yen to 15 000 yen) are required separately according to the product and quantity.

La Fenice: World's first Induction coffee machine by La Fenice - Kickstarter
https://www.kickstarter.com/projects/2106260358/la-fenice-worlds-first-induction-coffee-machine