"ENFOJER" capable of full-color monochrome photographic development of photographs taken with smartphones

Pictures taken with smartphones can be printed at convenience stores and home appliance mass merchandisers, but photographic developing machines capable of monochrome development of smartphone photos themselves using traditional methods "Enfojer"Of the cloud funding platformIndiegogoWe are looking for investment in.

ENFOJER - Old School Darkroom for Smartphones | Indiegogo
http://www.indiegogo.com/projects/enfojer-old-school-darkroom-for-smartphones

You can check how Enfojer can develop photos of smartphones from the following movies.

FOJO on Vimeo


Ilija Stjepic who is a project planner with Avoq who plays the piano and makes the movie excitement.


First of all, I took a picture with a smartphone.


Development must be done in the darkroom like this.


Select the photo you want to develop from the dedicated application ... ...


Set on the body of Enfojer with the screen of the smartphone facing down.


Close the lid snugly.


Twist the knob on the right side to adjust the focus of the picture displayed from the Enfojer main unit.


Adjustment is completed in a position where the focus is in good condition.


Then "Snap your fingers" is displayed so ......


Ring the finger a "snap!"


Next,Photographic paperSet.


Here again, ring the finger "snap!" And wait for 60 seconds.


After a while, move the photographic paper to the first tray into which the developer was poured.


Waiting for 120 seconds, the photos developed from the smartphone like this will come to the surface in a minute.


Next time,Stop solutionMove the photographic paper to the second tray where it was poured and place it for 30 seconds.


after that,Fixing solutionWait for 120 seconds after transferring the photographic paper to the third tray where you poured.


Finally, transfer the photographic paper to the fourth tray on which water was applied, flow the solution and dry it, the development is completed.


In addition,Negative filmIt is also possible to develop from.


After placing the negative film on the Enfojer main body and putting the smartphone screen down like above from the top, the rest is the same as the previous process.


The developed picture looks something like this. A format of 6 × 6 cm is used, and square-size photographs can be developed,InstagramIt is perfect if you use the photos of.


I set a smartphone on the main body of Enfojer.


The tray is color-coded and comes with a tongue for each tray.


The interface of Enfojer's development application is like this, and it corresponds to iOS and Android.


At the time of article writing, Enfojer's usually $ 350 (about 35,000 yen)Kit Knight(Enfojer main body, tray · tongue × 4, dedicated photographic paper × 100 sheets,Safe light), But it is possible to get with a contribution of 260 dollars (about 26,000 yen) for the first 24 users.


In addition to the full kit with a tray rackDarkroom CommanderYou can get one with a capital of 450 dollars (45,000 yen), shipping fee is free for both kits. The deadline is 15:59 on October 4 in Japan time.


In addition, liquids necessary for development are not included because international shipping is difficult. When purchasing, the developing solution is "Ilford (ILFORD) MULTIGRADE DEVELOPER"Or"PQ Universal"Ilford's" fixing solution "Rapid Fixer"Is recommended, and it is possible to use it except for Ilford products. However, because it is a chemical, you need to read the instructions carefully.