"Kata KT PL-3N1-25" review that can take a cup of sling bags and backpacks, protect digital lc cameras, laptop PCs, etc. from shock and store it compactly

While transporting the equipment by coverage and shooting trips, while precisely protecting precision equipment such as cameras and PCs, we have searched for bags that we can carry in the even if there is weight, as a result of searching "Sling back pack 3N1-PRO 25 PL KT PL-3N1-25"The storage capacity seems to be high, and the function of transforming from a sling bag to a backpack was also unique, so we decided to purchase it and look into usability.

front.


Diagonally behind.



side.



The fabric is made of nylon with ripstop (tear-off) included.


Water repellent processing is carried out, so even if rain or drinks are applied, it is difficult to soak water into it.


Urethane cushion is placed so that it surrounds contents and protects contents from impact.


The part hitting the back is like this.


The red part is made of high-fast-drying material.


The pad that hits the back is quite tight but the cushioning property is high so it's comfortable so much.


Belt is attached to the back to stabilize it by hooking it to the puller when put on the cart.


It will look like this when you put it on the cart (optional).


Since it has a grip on the top, smooth when pulling out from the trunk of the car. If it is a short distance it can be carried like a handbag.


Looking up the grips looks like this. Because it is made of a cloth with rip stop (tear stop), it will not be easily broken.


The bottom is like this. Make it with waterproof material, or rubber feet to float up a little from the floor and put it outdoors, so it is safe to use it, so it is a bit disappointing that it is not there.


Access to the upper compartment by opening the zipper.


Fastener is a very common size. Because it has a string to pull it, it seems that it can be opened in the rug while gloves are on.


Pad. Since the inside is bright yellow, it is possible to find out in Sugo even if parts and accessories of camera with many black inside are falling.


Mesh pocket on the inside of the upper cover.


Because there are two accessories on the back side, it is convenient to put smartphone etc.


If you put the iPhone 4S, the length of the belt of the fastening tool is not enough to fix firmly, but if there is nothing like running around so hard it is practically no problem level.


The main compartment contains a medium size SLR camera "Nikon D5100".


Telephoto lens for full size machine can also be stored.


A fastener is attached to the bottom of the upper compartment, so opening it opens up with the lower compartment, so it is convenient when putting in big baggage.


It was possible to store it when it puts in "PlayStation 3" which was close to the trial to actually how much thing enters. Please check the movie below to see how to put it in the bag.

I added PS3 to "Kata KT PL-3N1-25" - YouTube


In addition, although it will be possible to put long things up and down by this method, it is necessary to pay attention to the disadvantage that the compartment is narrowed by the folded cushion.

Small pocket on top side.


It is possible to take out quickly if you insert a card reader etc.


There is a pocket of the same size also on the other side.


In addition, there are fasteners also in the vicinity of the back, and opening it, ......


A cushioned PC compartment opens.



Please check the movie that you can see well that the laptop will be stored like this.

I put a 12-inch notebook in "Kata KT PL-3 N 1 - 25" - YouTube


There are also pockets on the back of the main unit.



It is possible to put small accessories.


Remove the plastic fasteners at the bottom of the bag ... ...


When opening the fastener, you can access the lower compartment where you can store a large camera.


When the lid is fully opened, it looks like this.


Since it comes with a cushion with Velcro, you can change the internal partitioning according to the camera you have.


This time I tried installing it like this.


Of the single lens reflex cameras, you can store it in the state that it is attached to the largest "Nikon D3S" with 24-70 mm lens.


Opening the side fastener ... ....


It is possible to take out the camera from the side.


It will be like this when carrying it as a sling bag.


Unlike backpacks and backpacks, there is only one shoulder strap so you can quickly raise and lower it.


Looking at it from the front.


Since the shoulder strap has a thick cushion, the belt will not dig into the shoulder even if you carry heavy luggage.


It is also possible to bring the krun and bag in front of the body while supporting the weight with a sling (shoulder strap).


Furthermore, since it is also possible to take the camera from the side as it is, it is convenient when shooting while repeating the movement.


As you hold the grip and pull it out, your finger is hooked on the shutter so you can take a quick shot immediately after taking it out of the bag.


When carrying a heavy baggage for a long time, it is more stable if there are two shoulder straps, so it can be deformed and used like a general backpack.

So, how do you actually transform it? It can be seen in the following movie.

I tried deforming "Kata KT PL-3N1-25" from backpack to sling bag - YouTube


Looking back like this in a backpack form, it looks like this.


The shoulder strap is as follows.


This is how it looks from the front when carrying the shoulder.


It is also possible to make bag closer to the body by crossing shoulder straps.


It looks like backpack state, but ... ....


When viewed from the front, the shoulder strap has become X-shaped. Actually carrying the bag, the bag sticks to the body pretty much stable, but because the neck around is pretty cramped it is not suitable for a long time use.


The included bag cover is as follows.



When it actually overlays it becomes like this.


Reversible specifications on the reverse side is silver.


The silver face is used to protect it from heat when placing the equipment under the scorching sun.


Because there is a ring at the top of the bag cover ......


When connecting with a fastener attached to a shoulder strap, the cover will not be blown even if strong winds are wiped off.


An accessory for attaching a tripod.


Attach the hook to the bottom of the bag by hooking it.


To the belt on the back of the main body ...


I attached a fixing belt.


Then the tripod is attached like this.


One large professional camera equipped with full size sensor and a medium size single lens reflex camera, strobe, replacement lens, notebook PC and AC adapter, tripod, card reader, iPhone, spare battery etc. are collectively called "Kata KT PL- 3N1-25 "is stored in the following movie can be seen.

Camera x 2, tripod, PC, strobe etc stored in "Kata KT PL-3 N 1 - 25" - YouTube


The selling price at Amazon as of the article creation is14,720 yenwas.


Also, there are models with different large and small capacities, so you can choose a slightly different size according to the application.


That's why, in the backpack form, even if you pack a camera, PC, small items etc even still, you can compactly put it together, you can carry with ease while protecting firmly, while still being required for speed In case it is possible to take out the camera and replace the lens without taking down the bag with a sling bag form, so it is highly recommended.