Indeed, the ghost of Sega, Dreamcast is converted to PC with Core 2 Duo 3 GHz / memory 4 GB / SSD 64 GB / BD drive and PS 2 is operated Shock movie

"The movie that I wished to revive the hard business of Sega and tried to remodel the final weapon Dreamcast and acquire nemesis hard" is a terrible content. I think that it can be understood from the volume of the first part 9 minutes 33 seconds and the second part 7 minutes 52 seconds, but it is beyond the domain of hobbies, and it is a ridiculous level to call just "professional crime" or "wild pro" . Although the completeness of detail is also great, the level of the movie itself is also high, it uses a tremendously easy-to-understand 3D model and it is equipped with electronic voice guidance, so you can see roughly what you are doing if you listen properly .

It is no exaggeration to say that the Sega of the counterattack is a reproduction of the movie from the following.
I modified Dreamcast into a PC with Core 2 Duo 3 GHz and tried to operate PS 2 (first half) - Nico Nico video (β β)

I modified Dreamcast into a PC with Core 2 Duo 3 GHz and tried PS 2 to work (second half) - Nico Nico video (β β)

For those without an account for Nico Nico Douga, the YouTube version is below.

YouTube - Dreamcast in Core 2 Duo 3 GHz running PS 2 [1/2]


YouTube - Dreamcast in Core 2 Duo 3 GHz running PS 2 [2/2]


It is supposed not to be halfway from the beginning of the first one, and there is a narration that "Everyone remember, the history of Sega that was fighting hard on their own hard ... ..." entered and that Yukawa From the point of bringing a masochistic CM by the executive director, the former Sega fans should not stop tears.


From that point why BGM became the treasure masterpiece STG "Ikaruga", and the main part starts at last. Confessions of astonishment saying "It has passed ten years since I cried on the commercials and bought five main units from that day."


And, along with the word "I revived this compact hardware as a high-performance PC by hiding the humiliation of withdrawing the hard business", remodeling begins like raging.



According to the author 's commentary, it is said that it was made once in 2001, but this obsession is not extraordinary at all.


This time I have set three new goals, "To work hard-hit hardTDP(Maximum amount of heat dissipation of microprocessor assumed for design) It is designed to cool the CPU of about 65 W and designs not only Core 2 Duo but also Core 2 Quad. "


"Model all the necessary parts including actual parts and parts with CAD and design them"


"In principle, it is prohibited to bond the parts to the case, design it with a screw fastening structure so that it can be assembled and disassembled.The use of hot bond with low softening temperature is out of the question and it is strictly prohibited."


It also explains the reason why we do not use Intel CPU "ATOM" which is low power consumption as CPU and also explains why we do not use "ATOM", "Low power consumption, extremely poor performance per clock, performance of 20% or less of Core 2 Duo 3 GHz We are not holding up with anything other than compromising to have a low-performance low-power CPU on the desktop. "


From here it is real. From the bottom it is said that the contents are quite high density, commentary has started like the cooling part, the USB base part, the motherboard, the wireless LAN module, the SSD, the Blu-ray drive infrastructure, the drive drive part ... ..., Introduction of details will begin in the order of production.


Adoption of the best method derived from the selection of cooling fans, actual machine tests, test results ...... and so on and so on, it continues indefinitely, but even by just watching it, "This is ... ... a real homebrew PC !!" I am impressed with the quality.

Furthermore, after the movie is published, the author is issuing additional comments like the following.

Many comments Thank you very much. Until my introduction to large encyclopedia, (/ _;.) Ikitate Yogakata -
Add supplemental heat resistance temperature of material.
Material temperature Use place
[ABS resin 130 ° C housing] [Polyimide adhesive tape 220 ° C insulation tape] [Teflon 240 ° C spacer] [Glass epoxy 180 ° C substrate · Washer]
[Silicone rubber 180 ° C adhesive] [Junflon wire 150 ° C board wiring] [Insulock 85 ° C banding band] [EPDM sponge 85 ° C ring]
Other information unpublished connectors etc. are boiled in a pot and heat tested.
I would be pleased if you could tell even a bit of the enjoyment of making things with this video.

Where the hell is it is unknown, I was impressed by the wonderful movie. "There are things under construction, but let's meet again next time", so please do your best in the future as well.