A fierce man who created an amphibious tank that can also be bombarded by himself appeared, and a production movie is also released
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/00_m.jpg)
'
Weaponised Homemade Screwtank-YouTube
Go on a steep slope without difficulty ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap004_m.jpg)
A small tank that advances with a screw was made by Mr. Colin Furze.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap005_m.jpg)
It is Mr. Fars who operates the tank with a big smile.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap007_m.jpg)
It looks like this on the left side of the tank. Something that looks like a weapon is attached.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap008_m.jpg)
There is something like a cannon on the right side.
There were levers and switches in the cockpit, which seemed to be comfortable to sit on.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap010_m.jpg)
Rockets are mounted on the ceiling.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap011_m.jpg)
The tank was built almost exclusively by Mr. Fars.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap015_m.jpg)
Cut the sheet metal ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap016_m.jpg)
I will cut out the parts one by one.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap017_m.jpg)
With the help of people, such as rounding the sheet metal of the screw part ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap018_m.jpg)
Welding is done by Mr. Fars himself.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap020_m.jpg)
Assemble the finished parts ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap024_m.jpg)
An engine is also available.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap026_m.jpg)
The completed screw part looks like this.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap027_m.jpg)
Next, assemble the sheet metal, gears, and chain ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap028_m.jpg)
Connect the screw and the car body.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap030_m.jpg)
The part that transmits the power of the engine to the screw is completed.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap031_m.jpg)
The square box with a hole in it is a gasoline tank for the engine.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap032_m.jpg)
Pour gasoline with a meter and a fuel filler.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap035_m.jpg)
The area around the completed engine looks like this.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap036_m.jpg)
With the chairs installed, the car body was almost completed.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap037_m.jpg)
That's why I went to a test run. There is a slight amount of screw left on the ground after it has been scooped out, so running on a flat surface is not a problem.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap039_m.jpg)
We will proceed on muddy rough roads with a margin.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap040_m.jpg)
However, a problem occurred in the water entry test. 'There was not enough buoyancy,' so further improvements were needed.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap041_m.jpg)
Therefore, a tank with sheet metal sealed tightly is mounted on the tank.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap043_m.jpg)
Then, as shown below, it is possible to navigate without difficulty on a water surface without waves.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap045_m.jpg)
After the running test, we mounted weapons on the side walls, ceiling, and sides of the car body and went to the operation test.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap046_m.jpg)
The main gun on the side is not a decoration, it can actually be fired.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap047_m.jpg)
The bullet is an apple.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap048_m.jpg)
Load the apples while crushing them.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap049_m.jpg)
To shoot the apple cannon, press the switch at the tip of the lever ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap050_m.jpg)
Click
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap051_m.jpg)
firing
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap052_m.jpg)
The apple hits the tree vigorously. It's not as powerful as breaking a tree, but ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap053_m.jpg)
It is so powerful that the bark of a tree that seems to be hard can be turned over.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap054_m.jpg)
And when you press the switch on the lever on the other side of the apple cannon ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap055_m.jpg)
What a flamethrower works. It is a tremendous firepower.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap056_m.jpg)
Furthermore, when the rocket on the ceiling is ignited ...
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap057_m.jpg)
A straight line to a distant target.
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap058_m.jpg)
Landing
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap059_m.jpg)
Big explosion
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap060_m.jpg)
In this movie, you can see the omnibus of Mr. Fars' process of making a tank. In addition, on
![](https://i.gzn.jp/img/2020/10/14/world-of-tanks-homemade-screwtank/snap061_m.jpg)
Related Posts: