"Energysquare" makes all smartphones and tablets wirelessly rechargeable

The benefit of "wireless charging" that charges without connecting with a USB cable, the charging pad that will be able to receive on any smartphone or tablet is "Energysquare"is.

Energysquare - always stay charged by Energysquare - Kickstarter
https://www.kickstarter.com/projects/700146891/energysquare-always-stay-charged

Energysquare is a wireless phone charging pad that does not use induction | TechCrunch
http://techcrunch.com/2016/05/31/energysquare-is-a-wireless-phone-charging-pad-that-doesnt-use-induction/

When using Energysquare, you need this little sticker.


Since the Micro - USB terminal is attached to the tip, insert it in the terminal of the smartphone and paste the remaining part on the back of the smartphone.


And here is the charging pad. There are 16 panels of 4 × 4 on the inside.


It is a very thin substitute.


When I put a smartphone with the sticker attached ... ...


Charging starts.


Conductive dots are attached to the stickers ......


It is charging mechanism by placing it so as to straddle two panels.


If it is a cable it is necessary to insert one for each one and it tends to be messy, but because it is wireless it can keep the state cleanly cluttered even if you are charging multiple units.


In addition, there is no hindrance to the operation, even if you place something other than the ones to charge on.


It is more waterproof, so it is okay to spill water on any chance.


Thanks, you can leave it on the table at any time.




Although the pads that have come up to this point are "Square One" of 4 × 4 size, there is also a large "Square Two" of 8 × 4 size. By the way, the size is 267.62 mm × 267.62 mm × 5.5 mm for Square One, 400.5 mm × 267.62 mm × 5.5 mm for Square Two. The panel is 55 mm on a side.


The charging speed is the same as when charging the USB cable normally. Since there are multiple types and stickers in the stickers, it is said that there is no problem with the smartphone, tablet, Android, iOS or Windows using terminals.

This product is currently seeking investment by Kickstarter and has already collected more than 55,000 euros (about 6,720,000 yen) against the target amount of 30 thousand euros (about 3.67 million yen).

After investing,
· 5 euro (about 611 yen): postcard from Paris
· 59 euro (about 7220 yen): Square One × 1, stickers × 5
· 69 euro (about 8440 yen): Square Two × 1, sticker × 5 (early discount)
· 79 euro (about 9670 yen): Square Two × 1, sticker × 5
· 99 euros (approx. 21,000 yen): Square One × 2, sticker × 10
· 299 euro (about 36,600 yen): Square One × 3, Square Two × 2, sticker × 25
· 899 euro (about 110,000 yen): Square One × 7, Square Two × 3, sticker × 899
Is available. The term of contribution is Japan time on June 24, 2016 at 23:58.