That "Bakusachi Brothers Let's & Go!" Appears as a figure that is likely to fly now

In the period from 1994 to 1999, the mini 4WD cartoon of Tetsuhiro Kogi that was serialized at the monthly Korokoro comic was "Brawl brothers Let's & go! It is!"is. "Bakuso brothers Let's & Go!" That supported the Mini 4WD boom through animation, movies, games, etc., but the heroes of Hoshi Hoshi and the brothers of Hoshuma Australia were figurized and furthermore The mini 4WD used by the two people was also exhibited.

Broke Brothers Let's & Go
http://cgi.shopro.co.jp/tv/let_go/

Mega Hobby MEGA HOBBY STATION | Megahouse's Hobby Product Information Website
http://www.megahobby.jp/products/item/1404/

At a corner of the mega house exhibition booth ......


Discover figures of Let's & Go in the blast brothers.


In addition to the figures, the booth had a mini 4WD package used by two people, Hori Hora and Hoshima Australia, and a Blu - ray BOX just released in August.


A sign of Mr. Haruna Ikezawa of "Hoshuma Australia" role.


This is a figure released from Megahouse "Hoshuma Australia & Magnum Saber".


Because "Mini 4-racer runs along with Mini 4WD at" Bakuso Brothers Let's & Go !! ", it is exactly like this during the race. Because it is a set of Hoshuma Australia and Magnum Saver, floating Magnum Saber in the airMagnum TornadoI would like to start playing.


With a feeling of dynamism as if it came out of the world of manga, the shadow of clothes and hair is also very polite and plus a three-dimensional feeling.


This is the attached Magnum Saber. Mini 4WD is also figurized so it is much smaller than normal one. In addition, since the figure of Victory Magnum is also attached to the first production benefit, it is also possible to reproduce the hot deployment to change machines.


And here is "Hoshi Horse & Sonic Saver".


This is also characteristic of lively dynamism posing.


"Initial production privilege of" Storm horn & sonic saver "is Vanguard Sonic's figure.


In the exhibition space, the first season Blu-ray BOX of "Brawler Brothers Let's & Go !!" remastering the original negative film with HD telecine was placed.


A revived memories of memories ......


In addition, you can watch the first episode of HD remastered version "Bakusan Brothers Let's & Go !!" from below.

For BD BOX 【High Definition HD Remastered Version】 Brawl Brothers Let's & Go! 1st episode - YouTube


Figures "Storm horn & sonic saver" and "Hoshuma Australia & Magnum Saber" are scheduled to be released in early February 2015 at 5,500 yen including tax.


After watching the figures of Hoshi Akira and Hoshi Gora cheerfully and then walking through the All Japan Model Hobby Show venue, I found a mini 4WD booth. I felt the side of the Mini 4WD Magnum of Harima Australia somewhat on the mini 4WD which is drawn as decadeca so if you try approaching ...


I found nostalgic Hurricane Sonic (left) and Cyclone Magnum (right). Thinking that it is an illusion of the eye, these were released in the 1990's, but only the chassis part of the latestAR chassisIt was a premium model.


This is "Cyclone Magnum Premium (AR Chassis)". It is scheduled to be released on November 21 with a tax of 1000 yen. When you look at the chassis that is next to you, you can see that it is certainly different from the old chassis.


However, the body and dedicated sticker remain as those at that time.


"Hurricane Sonic Premium (AR chassis)" will be released on November 21 at a taxation of 1000 yen. The feeling of this little old-fashioned sticker is very nostalgic.


Since the chassis is the newest AR chassis, if you install the latest parts and motors it will turn into an active and dynamic machine.


Red and green machines are often used for stickers.


Below that there is a corroko aniki ... ...


Mini 4WD which seemed somewhere.


This is the new Magnum designed by Mr. Toshihiro Toshihiro who is a machine called "Z Wing Magnum (AR chassis)" which appears in the sequel of "Roses brothers Let's & Go !!" which serial series starts at Korokoro Aniki!


Sticker is an old style sparkling sticker.


It is also possible to make it "windmagnum" like by processing the body.


It will be like this when you boldly cut the body. In addition, "Z Wing Magnum (AR chassis)" is scheduled to be released on November 8 with tax of 1000 yen.


Since a lot of the latest mini 4WDs were lined up, I tried to talk a bit about the trend of the mini 4WD. In the 1990s, "hollow meat" was said to have made a hole in the body to lighten even a little, but recent mini 4WD has improved motor performance, you can use high performance motor It seems that you can get enough speed. Instead, because the speed is too high and the vehicle body tends to float due to steps or the like, it is often that the ingenuity is settled so that the vehicle body does not float with a weight attached purposely.


The gilded parts attached to the pole attached to the side of the mini 4WD is a mass part called a mass damper.


When the car body floats up, the mass damper also rises together, so that the car body will not rise more than necessary due to the impact when the mass damper falls.


Other parts such as ball link mass damper (commonly known as Tohoku Damper), which I did not see in the 1990s, have been appearing one after another, and the world of Mini 4WD has been deepened.