A personal computer "Mac Pro replica" that reproduced the new Mac Pro using a trash can

With unique appearance designRational and precise hardware designA new model that pushes Apple fansMac ProInspired by the replica of the Mac ProDOS / V machineA strong man who made her own appeared in.

Mac Pro (late 2013) replica / tonymacx86.com
http://www.tonymacx86.com/mac-pro-mods/120757-mac-pro-late-2013-replica.html

"Mac Pro replicas" were produced by GermansDschijnMr. So farPower Mac G5Dschijn who has produced a DOS / V machine using the case, but this time, I also procure the case on my own and make my own machine. Production scenarios of Mac Pro replica are as follows.

Motherboard is GIGABYTEGA-Z 87N-WIFI, CPUFourth generation (Haswell) Core i 3. CPU cooler uses retail items.


The memory is Corsair's XMS 3 series.


The graphic boardSAPPHIRE HD 7750. I do not dare use onboard graphics, I am particular about GPU performance.


Unlike genuine Mac Pro, Mac Pro Replica is composed of top and bottom 2 fans. This is the state of the bottom fans. Fans are JapanesesizeMade.


Arrange the motherboard over the fans. The graphic boardRiser cardIt seems that it is installed by using (daughter board).


Air intake is handmade.


From the direction of the fan, you can see that it is a structure to take in air from the bottom of the PC.


Completed cover attached to the bottom.


When attached to a PC it looks like this.


Equipped with Samsung SSD and Fujitsu hard disk. An apple on the hard disk. Apparently the pattern of diverted items from Mac.


Graphic board · It is a structure to sandwich mother board with power supply and storage. The top fans are also installed, and the contents of the PC are completed.


Here is the case cover of the Mac Pro replica (before painting).


The original is a garbage can here. It seems to use it by turning up and down.

Authentics 1200614 Bad-Abfalleimer LUNAR / 6 L / hellgrau: Amazon.de: Küche & Haushalt


The back panel is arranged like this.


I put a trash can case on the hardware.


Peeling from the top and like this.


The gap is closed with punching metal, and the fan controller is also attached at the bottom.


Also covering the punching metal on the case top.


Paint the case in apple color ... ....


Installation. It is difficult to see by blurring, but somehow the mark is on the lower side ......


It is Apple mark from anywhere.


Punching metal to black color.Mac Pro bidding for about 100 million yenAlthough it does not go on, it is quite stylish coloring.


The Mac Pro Replica is 18 cm wide and 26 cm high. The production cost excluding PC parts is 60 euro (about 8500 yen).