How to make "paper cutter" to cut corrugated cardboard, acrylic board, plastic, wooden piece with no discrimination A4 paper



Everyone seems to have experienced cutting the finger sharply with paper, but I cut it from acrylic board to wooden stick using A4 paper anywhere "Paper cutter"The movie that makes it is released, and you can see how it actually cuts material harder than paper.

Using Paper to Cut (Acrylic, Plastic, Wood) - YouTube


First prepare A4 paper and scissors, and cut off the paper square.


Fill the glue in the remaining part ......


Paste the cut paper firmly with your hands.


Cut out with the circle cutting cutter the part where 2 piles are stacked.



Rewards appeared here.


Attach the screw to the center of the cut round paper piece ......


Fix it to the tip of the ruther.


In this state, turning on the power turns the paper into a blade of the cutter.


First of all, I tried putting a blade on a cardboard, where a splendid sharpness ...! I could not believe it was bent and it crooked.


If you take care of it carefully and hit the blade carefully, you can see that much thicker cardboard is cut than paper.


There seems to be a need for hitting the blade, but if you move it as it is ......


I succeeded in cutting corrugated boards brilliantly.


Next time the hardness rose suddenly and challenged the acrylic board. As I was thinking "This is impossible?", Slowly cutting paper cutters slowly breaks down little by little.


Even though I advanced the blade as it was, I went along cutting without blurring the blade.


In addition, the cover of plastic is cut off so much that it seems that it melts with heat.


The plastic tube will be cut one after another as if cutting gum.



The end is a wooden stick. This looks like it seems to be difficult, but as soon as paper blades cut the pieces of wood.


It seems to be quite difficult to cut, and there is something like circular brown on paper blades due to friction ... ...


In the end I succeeded in cutting spatters.


In addition, the same contributor has also uploaded an improved version of the paper cutter movie with its paper pieces enlarged.

Cutting with an Angle Grinder and Paper (Plasterboard, plastic, wood) - YouTube

in Hardware,   Video, Posted by darkhorse_log