Case "Smart HYBRID for iPhone 5" case for aluminum and natural wood iPhone 5 / 5s that can incorporate wireless charging kit

Charging of mobile phones, which was previously sufficient only once every 3 days, has advanced with advanced functions of terminals and smart phones, and now it is safe to say "daily routine" became. Although it can not be helped, it can be said that it is a little troublesome to have to charge the cables every time. It will eliminate such inconvenienceQiIt is a charging method by wireless power supply based on international standard called Qi.

Wireless power supply is gradually spreading, but in the case of Apple, it is not even installed in the latest iPhone 5s. IPhone users have been forced to give up wireless power supply, but it has become possible to get the function by purchasing a special receive antenna separately.

IC card · Qi contactless charging compatible! IPhone 5 · iPhone 5s Aluminum and wooden iPhone case Smart HYBRID for iPhone 5 【free shipping】
http://xexeed358.jp/SHOP/sh50001.html

"Smart HYBRID for iPhone 5" has a shape that combines aluminum (duralumin) scraping parts called "Upper" with parts cut out of natural wood "Lower".


"Upper" has a shape that covers the periphery of the home button "Type 1" and a simple shape like "bumper" Type 2 "is prepared.


Choice is possible from four kinds of color: "material silver" "lighting gold" "silent black" "fighting red".


"Smart HYBRID for iPhone 5" is a computer-controlled machine tool "Machining center"We are processing it. You can see the pattern of cutting traces that the cutting tool passed through on the surface, you can know that precise processing is being applied.


The state of the turned-over back side looks like this.


The pattern engraved by the cutting process is left intact.


The "Lower" part to set on the camera side can be selected from two colors "Walnut" and "Black Cherry".


Inside, there is a dent to accommodate the IC card and the Qi non-contact charging antenna moduleCuttingIt is being done.


Parts of the camera and LED lighting were cut obliquely, and it was designed to prevent halation during photography.


A rubber sheet of about 1 mm thick is attached to the product. As for how to use this ... ...


It is a spacer for pasting on the corner part of the iPhone and reducing contact with the case.


It is also possible to prevent rattling by pasting a sheet cut out on the curve to the upper side.


Although four screws are attached at the time of purchasing goods,Sold separatelyBy purchasing additional screws, you can also make it to suit your taste.


The product comes with a seat to prevent interference that IC card operation is affected by radio waves emitted by the iPhone.


Put the IC card in the card storage part of the lower case ... ...


If you build a case with interference prevention sheets stacked on top of it, you can prevent errors such as at the station's ticket gate or convenience store settlement.


Also in this partSold separatelyThe "Qi contactless charging antenna module patch" (4660 yen · tax included) can be installed.


Attach the Lightning connector of the antenna module to the iPhone ......


Turn over and place it on the iPhone main body.


And just cover the lower case ......


Tighten the screw with the included tool to assemble it.


The case is completed. It became tightened appearance by two tone coloring of aluminum part and wood part.


Of course, interference to the speaker and earphone jack on the bottom of the iPhone is also zero.


Appropriate space is provided around various buttons and it seems that it is designed not to disturb the operation.


Then, let's actually charge with wireless power supply. This time we use Nexus 4 genuine accessory which was rolling in the editorial department "Nexus 4 Wireless Charger"is.


If we put the case on top of the stand as a matter of course ...


The backlight is on and it has entered the charged state.


For comparison, iPhone 5 connected to genuine charger is prepared. I measured the time required for charging from zero to full charge.


With a genuine charger it became fully charged in about 100 minutes, whereas in case of Qi contactless charging it was about 160 minutes.


Here is what I tried to graph. You can look at the charging speed with a genuine charger clearly.


I compared the temperature of the terminal during charging. Compared to iPhone 5 (left) being charged with genuine charger, you can see that the surface of iPhone 5s (right) during Qi charging is getting warmer, but at this level the temperature is about 37 degrees and it feels hot There was no. The room temperature at the time of verification was constant at about 21 degrees.


After using it for a while it felt a little regret that it was impossible to remove the Lightning connector with the case attached. I'd like to plug and unplug the cable to connect to the PC with a USB cable and synchronize with iTunes, but if you set it so that Wi-Fi sync can be done, it may be avoided to some extent.


It became "Smart HYBRID for iPhone 5" which makes wireless charging which gradually shows signs of spreading even on the iPhone 5 / 5s. Although it takes 1.6 times as pure as before to fully charge, if you are charging people while sleeping you may not feel disadvantage. People who are struggling to organize around the cables and of course, it seems to be a perfect case for those who want metallic texture of aluminum.