Tanita's thin scale weighing machine "Body Composition Meter Inner Scan 50 BC-313" Reviewing Measurers by Means of Riding to Provide Measurement Results Review

If you want to measure body fat etc. with a scale, you first have to press the measuring switch, ride on the weight scale after measuring the personal number, press the measurement switch again after the measurement, but the measurement switch Or Body weight, body fat percentage, BMI, estimated bone mass, muscle mass, visceral fat, basal metabolism based on the height and age to which the measurer is merely riding on the scale even without pressing the personal number It displays the amount · body age etc. as "Body composition indicator inner scan 50"is.

Body Composition Meter Inner Scan 50 BC - 313 (Pearl White) | Products | Tanita Corporation
http://www.tanita.co.jp/tanita/hp/productDetail.do;jsessionid=8BE842E96174E9BB0A1716E3BE61D7D2?_productId=1542&_isListBack=true

Body Composition Meter Inner Scan 50 BC - 313 (Pearl White) package looks like this.


The point of this scale is "Pita ride"function. Even if you do not press the measurement button or personal number, you only recognize the measurer from the weight or the electrical resistance of the body by riding the scale.


Inside of the box contained the body scale and the instruction manual.


The body looks like this. The size is 217 mm × 316 mm × 27 mm, and the weight of dry cell batteries is about 1.5 kg.


Four flat buttons on the surface. All operations are done here.


A side view.


Stylish design with tempered glass, thickness is only 27 mm.


Because it is thin, it is possible to stand up even with just a few gaps.


The back side looks like this.


First of all, set 4 AAA batteries in the main unit.


Since it is necessary to register the area, date and time · personal data at the beginning, register the area from "setting" button on the left side. Registration of the area, depending on the area of ​​useAn error may occur due to the influence of gravityFor.


Region numbers are described in the instruction manual.


Continue to register the date and time.


When registration is completed, the power turns off automatically.


Press the setting button again, register personal data this time. Select your personal number and enter your birth date and height. Personal data 1 is a height of 169.5 cm, an editorial staff member 1 of a 26 year old male.


After entering the height, ride the scale with the bare feet, register the measurement result such as the current weight.


Approximately 40 seconds after the measurement result is displayed, the power supply is automatically turned off again.


Personal data can be registered up to number 5, further registration.


Personal data 2 is 171 cm tall and is an editorial staff member 2 of a 45 year old male.


After registering personal data in that way, the editorial staff 1 will try again on the scale.


Power on automatically when you get on the scale. Facey characters appear on the monitor, and registrants are being recognized.


I heard a beep and displayed "1". As registered, it was recognized as personal data 1. From the scale it got off when the sound rang OK.


Following the body weight of 50 g, body fat percentage, BMI, estimated bone mass, muscle mass, visceral fat level, basal metabolic rate, body age, etc. are displayed.


In addition, in the instruction manual "What is BMI", "What is body fat percentage", "What is visceral fat" and the explanation about what each numerical value indicates is written. For example, if it is 18.5 or more and less than 25 in weight scale for BMI, it is an ordinary figure, if it is less than that value it is a lean type, if it is more than that it is obese type.


There is also a body fat percentage judgment table.


Is personal data recognized even while wearing socks? And editorial staff 2 tried the experiment ... ...


I was able to recognize it. However, in order to get the correct data you need to ride your scale with bare feet.


Data measured in the past is not accumulated, but the previous value can be seen by pressing "Setting" while displaying the measurement result.


Since the automatic correction function is attached, even if it stands up or puts it on the top, if it is placed firmly on a flat floor, errors such as storage time are corrected, and accurate numerical value can be outputted. At the time of writingAmazon's price is 5809 yen including taxIt has become. Although it is a neck that it is not possible to accumulate the measurement result, it is possible to see even fine data even if you do not specify the measurement button · personal number like the weight scale so far, so how to use is extremely luxurious. It seems to be pretty handy when registering personal data and using some scales with a scale.

Amazon.co.jp: TANITA 【Weight 50g Unit Display】 & amp; 【Pita Function to Put on a Rider】 【Body Composition Meter Inner Scan 50 Pearl White BC-313-WH: Home & amp; Kitchen