The contents of the package of the low price model 'Pixel 3a' and 'Pixel 3a XL' of Google Pixel series which can be bought from the 40,000 yen range like this


Google smartphones ' Pixel 3a ' and ' Pixel 3a XL ' were released on Friday, May 17, 2019.

It is positioned as an inexpensive version of Google Pixel 3 , with some features omitted, but it must be a terminal equipped with the latest Android OS. Since the real thing arrived at hand, I immediately opened it.

Pixel 3a & Pixel 3a XL-Vivid Camera-Google Store
https://store.google.com/jp/product/pixel_3a

This is what the package for Pixel 3a Purple Ish (left) and Pixel 3a XL Cleary White (right) look like. The body is 3a XL one size larger than 3a, but the package is the same size.



If you line the bottom of the package, you will find that the thickness is the same.



The right side of the package is printed with a side view of the main unit. It is obvious that the 3a XL (lower) is slightly larger than the 3a (upper).



The left side is the Google logo. 3a XL is slightly grayish.



'G' mark was printed on the bottom of the package.



The image picture printed on the back of the package looks like this.



When I open the box right away, the body suddenly appears.



I took out the main unit. Purple Ish 3a is a fairly pale purple, whereas Clearly White 3a XL is a pure white body.



When the main unit is removed, there is a paper case with a 'G' mark and a case with an AC adapter, and below that are the cables and connectors.



The paper case with the 'G' mark contained a SIM card replacement pin and user guide, basic safety information, and 'G' and '#teampixel' stickers.



The AC adapter looks like this.



It has one USB Type-C connector.



The input is 100-240V, 0.5A, and the output is 5V, 3.0A and 9V, 2.0A.



The attached cable is a 1m cable whose both ends are USB Type-C terminals. Connectors are USB Type-C (male) and USB Type-A (female) connectors. The AC adapter is connected via USB Type-C, but using the connector enables charging with a USB Type-A or USB Type-C cable.



The 3a and 3a XL are available in genuine cases such as 'Google Pixel 3a Case' and 'Google Pixel 3a XL Case' in three types: Carbon, Fog and Seascape. Google Pixel 3a Case Carbon looks like this.



When the contents are taken out of the box, the case is settled as it is. The surface is a canvas-like fabric with a rough feel. If you put on the case, it is unlikely that the body will slip from your hand. The 'G' mark on the lower center is not a print but a separate part.



I removed the case from the box and looked at the other side. A dark gray microfiber cloth was attached to the back of the case to make it hard to damage the surface of the terminal. In addition, 'Google Pixel 3a' is inscribed in the lower center.



Immediately remove the protective film from the body ...



Wear the case. There is a hole in the camera part and the fingerprint recognition sensor part.



The top surface is exposed 3.5 mm audio terminal connector and microphone.



The bottom has exposed USB Type-C connection part and the both sides speaker.



The power button and the volume button on the right side look like this. The black power button is a separate plastic part and the volume button is covered in fabric. Because it is a black cover and a black power button, although the material is different, the visibility may be a little worse.



At first glance it is difficult to know where the volume button is, but when you touch it you can see the position of the button right away because it is solidly raised. When viewed from the side, you can clearly see what the volume button is claiming. If you try to press the button on the case while wearing the main unit, both the power button and the volume button will give you a solid feeling of 'ticking'.



For the 3a XL case, select the Fog color. The impression of light gray with the fabric woven with white and black yarn.



Bright beige microfiber cloth was pasted on the other side. It is a case of Pixel 3a XL, but there is a stamp called 'Google Pixel 3a' in the lower center.



Quickly attach the 3a XL body.



Hole in camera part and fingerprint recognition sensor part.



Top surface where the microphone and 3.5mm audio terminal connector are exposed.



And the design is the same as the case of 3a only with the size and color different from the bottom where the USB Type-C and left and right speakers are exposed.



The power button on the case is a separate part made of bright orange plastic, which is clearly more visible than Carbon's black button. The volume control button is still covered in cloth.



This was also seen firmly from the side, and if you were touching it, you could see the place immediately.

in Review,   Mobile,   Hardware, Posted by log1i_yk