I tried using a tough case "TaskOne G 3" that built in 22 kinds of tools that the iPhone turns into a knife, a bottle opener, a driver, etc.
In addition to protecting the iPhone with a rugged aluminum case, it houses 22 kinds of tools such as knife, screw, screwdriver, pliers, bottle opener, stand, allen tool etc and it plays an active part in outdoor and do-it-yourself work iPhone 5 / The case for 5s is "TaskOne G3"is. It is a case where digital and analog that it was developed by former Apple engineer are fused, but how much can actually be used? So, I bought it and tried it a lot.
TaskOne G3 iPhone 5 / 5S case | Tasklab
http://www.thetasklab.com/task-one-multi-tool-case
This is the package of TaskOne G3.
Some of them included main body, screen protector, serial number registration card, assembly manual, etc.
This is TaskOne G3. The knife stuck out when it arrived, and the Allen wrench was separately provided.
On the back side, what is stored in each slot is written on the seal.
Peel off the seal and store all the tools all together. A ruler is also attached to the long side of the case.
The thickness is 11.9 mm, the weight is 100 grams. I thicken and heavy the iPhone one by one.
Before using, store the screwdriver stuck in the Teppen first in the case.
The knife also puts down the knob and stores it.
In addition, the knife has a primary lock button, so that the knife will not come out unless you move the button, so the knife does not jump out and hurt the inside of the bag unintentionally.
So, first of all it is an assembly work. Because the box contains an L-shaped Allen wrench and a screw etc ......
Remove the screw fixing the main unit with a wrench.
Paste the enclosed screen protector on the handheld iPhone.
Remove the bottom protector and put the iPhone in the case.
Fasten with screw once more.
That's it. It is an ordinary iPhone case from the table ... ...
Turning the back and putting it in various ways, it quickly transforms into a tremendously strong iPhone.
Charging port and earphone jack were exposed properly.
Power button.
Side volume button, manner mode button etc. are also this street.
The other side.
The camera and flash were also exposed.
So we will look at each function one by one. First off is a knife & saw.
If you push the knife & saw blade's knob to the other side, the bottle opener will appear.
When sliding the knob on the left side, two screwdrivers will come out.
This is a screwdriver.
When using it it is easy to work by removing the screwdriver and inserting it into the slot on the top.
Allen tool which was separately provided.
The six Allen wrenches of different sizes correspond to hexagon socket head bolts of various sizes.
There are also two bicycle spoke wrenches and a tool for peeling the wire coating.
Plate the plate in the slot on the bottom along the direction of the arrow.
Be careful as the plate will come out easily if you do not push it too far at the tip of the nail.
There was another slot on the bottom, and pliers & wire cutter was stored.
Here is a wire cutter.
Furthermore, inserting a screwdriver bar in the slot on the back ... ...
It can also be used as a stand.
You can stand upright even.
You can stand up and use the iPhone as follows without having to carry the stand.
So I will actually use the iPhone case.How to make "mini-charcoal grill stove" that can make BBQ with empty can only MovieAccording to the iPhone, I decided to try making a mini stovetop.
First make empty cans to two.
I will make a net of stove with wire, but the wire that stops the wire has been cut considerably short and I could not remove it with bare hands, so I used the case at once. I will remove it with grinding using pliers.
I was able to remove the wire safely.
For wires with a coating, peel off the coating using the recess of the plate with Allen tool.
Next we will make a net using pliers.
This time I used a 1.2 mm diameter wire, but it is somewhat difficult to cut at a stroke using a wire cutter. I managed to cut it by moving the handles and pliers with hands and grinding.
Next, I will punch a hole in the can, but use a screwdriver to spread the place where I made a break using a knife.
Place a U-shaped bracket in the open hole.
We cut the upper and lower two cans together, and we will install a hinge.
This completes the mini stove.
I cooked charcoal and baked juwajuas sausage.
Cut the burnt sausage with a knife.
The knives are pretty sharp so sausages are cut out of sausages.
Because the bottle opener is attached, I forgot to buy a bottle opener though I bought drinks! Even when it says it is okay.
It is also possible to cut thick meat with sawdust and even branches of trees in some cases.
Fluent with juicy meat on iPhone.
The state when looking from the front is like this.
So, TaskOne G3 was an excellent one that made it possible for the iPhone to do a multi - role with just one case. In addition, the price of the main unit is 99.95 dollars (about 10,000 yen), in the case of ordinary mail the shipping fee is 15 dollars (about 1500 yen), the goods arrive in about 6 to 10 days. In the case of Semi express flight, the shipping fee is 49.07 dollars (about 5000 yen), and the goods arrived in about 6 to 10 days. In the case of international speed mail, the item will arrive from 3 to 5 days from the order with a shipping cost of $ 58.43 (about 6000 yen).
TaskOne G3 iPhone 5 / 5S case | Tasklab
http://www.thetasklab.com/task-one-multi-tool-case
In addition, TaskOne G3 with Japanese instructions can be purchased from Japan Amazon at 13,800 yen including tax.
Amazon.co.jp:
Related Posts:
